[PATCH 11/29] ARM: shmobile: lager: add i2c1, i2c2 pins

[Simon Horman]

From: Ben Dooks <ben.dooks at codethink.co.uk>

Add pinctrl definitions for i2c1 and i2c2 busses on the Lager board
to ensure these are setup correctly at initialisation time. The i2c0
and i2c3 busses are connected to single function pins.

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
[horms+renesas at verge.net.au: Added shmobile to patch title]
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index bd92dcf..3297b86a 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -144,6 +144,16 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	i2c1_pins: i2c1 {
+		renesas,groups = "i2c1";
+		renesas,function = "i2c1";
+	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
 };
 
 &extal_clk {
@@ -349,10 +359,14 @@
 
 &i2c1	{
 	status = "ok";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
 };
 
 &i2c2	{
 	status = "ok";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
 };
 
 &i2c3	{
-- 
2.0.0.rc2