[PATCH v6 1/6] clk: samsung: add infrastructure to register cpu clocks
amit daniel kachhap
amit.daniel at samsung.com
Sun Jun 22 19:08:18 PDT 2014
On Tue, Jun 17, 2014 at 8:55 PM, Thomas Abraham <thomas.ab at samsung.com> wrote:
> From: Thomas Abraham <thomas.ab at samsung.com>
>
> The CPU clock provider supplies the clock to the CPU clock domain. The
> composition and organization of the CPU clock provider could vary among
> Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers
> and gates. This patch defines a new clock type for CPU clock provider and
> adds infrastructure to register the CPU clock providers for Samsung
> platforms.
Thomas,
The overall code structuring looks very neat. Few minor and some
optimization points are suggested below,
After updating them you can add and sorry for late review.
Reviewed-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
>
> Cc: Tomasz Figa <t.figa at samsung.com>
> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> ---
> drivers/clk/samsung/Makefile | 2 +-
> drivers/clk/samsung/clk-cpu.c | 577 +++++++++++++++++++++++++++++++++++++++++
> drivers/clk/samsung/clk.h | 5 +
> 3 files changed, 583 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/samsung/clk-cpu.c
>
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 69e8177..f4edd31 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -2,7 +2,7 @@
> # Samsung Clock specific Makefile
> #
>
> -obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
> +obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o clk-cpu.o
> obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o
> obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
> obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
> diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
> new file mode 100644
> index 0000000..c40f7b5
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-cpu.c
> @@ -0,0 +1,577 @@
> +/*
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * Author: Thomas Abraham <thomas.ab at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This file contains the utility functions to register the CPU clocks
> + * for Samsung platforms.
> +*/
> +
> +#include <linux/errno.h>
> +#include "clk.h"
> +
> +#define E4210_SRC_CPU 0x0
> +#define E4210_STAT_CPU 0x200
> +#define E4210_DIV_CPU0 0x300
> +#define E4210_DIV_CPU1 0x304
> +#define E4210_DIV_STAT_CPU0 0x400
> +#define E4210_DIV_STAT_CPU1 0x404
> +
> +#define MAX_DIV 8
> +#define DIV_MASK 7
> +#define DIV_MASK_ALL 0xffffffff
> +#define MUX_MASK 7
> +
> +#define E4210_DIV0_RATIO0_MASK 0x7
> +#define E4210_DIV1_HPM_MASK ((0x7 << 4) | (0x7 << 0))
> +#define E4210_MUX_HPM_MASK (1 << 20)
> +#define E4210_DIV0_ATB_SHIFT 16
> +#define E4210_DIV0_ATB_MASK (DIV_MASK << E4210_DIV0_ATB_SHIFT)
> +
> +#define E4210_CPU_DIV0(apll, pclk_dbg, atb, periph, corem1, corem0) \
> + (((apll) << 24) | ((pclk_dbg) << 20) | ((atb) << 16) | \
> + ((periph) << 12) | ((corem1) << 8) | ((corem0) << 4))
> +#define E4210_CPU_DIV1(hpm, copy) \
> + (((hpm) << 4) | ((copy) << 0))
> +
> +#define E5250_CPU_DIV0(apll, pclk_dbg, atb, periph, acp, cpud) \
> + (((apll << 24) | (pclk_dbg << 20) | (atb << 16) | \
> + (periph << 12) | (acp << 8) | (cpud << 4)))
> +#define E5250_CPU_DIV1(hpm, copy) \
> + (((hpm) << 4) | (copy))
> +
> +#define E5420_EGL_DIV0(apll, pclk_dbg, atb, cpud) \
> + (((apll << 24) | (pclk_dbg << 20) | (atb << 16) | \
> + (cpud << 4)))
> +#define E5420_KFC_DIV(kpll, pclk, aclk) \
> + (((kpll << 24) | (pclk << 20) | (aclk << 4)))
> +
> +enum cpuclk_type {
> + EXYNOS4210,
> + EXYNOS5250,
> + EXYNOS5420,
> +};
> +
> +/**
> + * struct exynos4210_cpuclk_data: config data to setup cpu clocks.
> + * @prate: frequency of the primary parent clock (in KHz).
> + * @div0: value to be programmed in the div_cpu0 register.
> + * @div1: value to be programmed in the div_cpu1 register.
> + *
> + * This structure holds the divider configuration data for dividers in the CPU
> + * clock domain. The parent frequency at which these divider values are valid is
> + * specified in @prate. The @prate is the frequency of the primary parent clock.
> + * For CPU clock domains that do not have a DIV1 register, the @div1 member
> + * is optional.
> + */
> +struct exynos4210_cpuclk_data {
> + unsigned long prate;
> + unsigned int div0;
> + unsigned int div1;
> +};
This structure is used for infact all exynos SOCs, if possible see if
this can be renamed to exynos_cpuclk_data.
> +
> +/**
> + * struct exynos_cpuclk: information about clock supplied to a CPU core.
> + * @hw: handle between CCF and CPU clock.
> + * @alt_parent: alternate parent clock to use when switching the speed
> + * of the primary parent clock.
> + * @ctrl_base: base address of the clock controller.
> + * @offset: offset from the ctrl_base address where the CPU clock div/mux
> + * registers can be accessed.
> + * @lock: cpu clock domain register access lock.
> + * @type: type of the CPU clock.
> + * @data: optional data which the actual instantiation of this clock
> + * can use.
> + * @clk_nb: clock notifier registered for changes in clock speed of the
> + * primary parent clock.
> + * @pre_rate_cb: callback function to handle PRE_RATE_CHANGE notification
> + * of the primary parent clock.
> + * @post_rate_cb: callback function to handle POST_RATE_CHANGE notification
> + * of the primary parent clock.
> + *
> + * This structure holds information required for programming the cpu clock for
> + * various clock speeds.
> + */
> +struct exynos_cpuclk {
> + struct clk_hw hw;
> + struct clk *alt_parent;
> + void __iomem *ctrl_base;
> + unsigned long offset;
> + spinlock_t *lock;
> + enum cpuclk_type type;
> + const void *data;
> + struct notifier_block clk_nb;
> + int (*pre_rate_cb)(struct clk_notifier_data *,
> + struct exynos_cpuclk *,
> + void __iomem *base);
> + int (*post_rate_cb)(struct clk_notifier_data *,
> + struct exynos_cpuclk *,
> + void __iomem *base);
> +};
> +
> +#define to_exynos_cpuclk_hw(hw) container_of(hw, struct exynos_cpuclk, hw)
> +#define to_exynos_cpuclk_nb(nb) container_of(nb, struct exynos_cpuclk, clk_nb)
> +
> +/**
> + * struct exynos_cpuclk_soc_data: soc specific data for cpu clocks.
> + * @ops: clock operations to be used for this clock.
> + * @offset: optional offset from base of clock controller register base, to
> + * be used when accessing clock controller registers related to the
> + * CPU clock.
> + * @data: SoC specific data for cpuclk configuration (optional).
> + * @data_size: size of the data contained in @data member.
> + * @type: type of the CPU clock.
> + * @pre_rate_cb: callback function to handle PRE_RATE_CHANGE notification
> + * of the primary parent clock.
> + * @post_rate_cb: callback function to handle POST_RATE_CHANGE notification
> + * of the primary parent clock.
> + *
> + * This structure provides SoC specific data for CPU clocks. Based on
> + * the compatible value of the clock controller node, the value of the
> + * fields in this structure can be populated.
> + */
> +struct exynos_cpuclk_soc_data {
> + const struct clk_ops *ops;
> + unsigned int offset;
> + const void *data;
> + const unsigned int data_size;
> + enum cpuclk_type type;
> + int (*pre_rate_cb)(struct clk_notifier_data *,
> + struct exynos_cpuclk *,
> + void __iomem *base);
> + int (*post_rate_cb)(struct clk_notifier_data *,
> + struct exynos_cpuclk *,
> + void __iomem *base);
> +};
> +
> +/*
> + * Helper function to wait until divider(s) have stabilized after the divider
> + * value has changed.
> + */
> +static void wait_until_divider_stable(void __iomem *div_reg, unsigned long mask)
> +{
> + unsigned long timeout = jiffies + msecs_to_jiffies(10);
> +
> + while (time_before(jiffies, timeout))
> + if (!(readl(div_reg) & mask))
> + break;
I think do while is more appropriate here. I think usually the divider
status will be be mostly clear and then time_before is never called.
> +
> + if (readl(div_reg) & mask)
> + pr_err("%s: timeout in divider stablization\n", __func__);
If succes then return earlier. This readl call can be avoided.
readl_relaxed is faster than readl. I don't have the numbers but check
if all readl/writel can be replaced with the relaxed version. Since
with cpufreq driver these clock calls will be very frequent so this
optimization makes sense.
> +}
> +
> +/*
> + * Helper function to wait until mux has stabilized after the mux selection
> + * value was changed.
> + */
> +static void wait_until_mux_stable(void __iomem *mux_reg, u32 mux_pos,
> + unsigned long mux_value)
> +{
> + unsigned long timeout = jiffies + msecs_to_jiffies(10);
> +
> + while (time_before(jiffies, timeout))
> + if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
> + break;
> +
> + if (((readl(mux_reg) >> mux_pos) & MUX_MASK) != mux_value)
> + pr_err("%s: re-parenting mux timed-out\n", __func__);
Same as above.
> +}
> +
> +/* common round rate callback useable for all types of CPU clocks */
> +static long exynos_cpuclk_round_rate(struct clk_hw *hw,
> + unsigned long drate, unsigned long *prate)
> +{
> + struct clk *parent = __clk_get_parent(hw->clk);
> + *prate = __clk_round_rate(parent, drate);
> + return *prate;
> +}
> +
> +/* common recalc rate callback useable for all types of CPU clocks */
> +static unsigned long exynos_cpuclk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + return parent_rate;
> +}
> +
> +static const struct clk_ops exynos_cpuclk_clk_ops = {
> + .recalc_rate = exynos_cpuclk_recalc_rate,
> + .round_rate = exynos_cpuclk_round_rate,
> +};
> +
> +/*
> + * Calculates the divider value to be set for deriving drate from prate.
> + * Divider value is actual divider value - 1.
> + */
> +static unsigned long _calc_div(unsigned long prate, unsigned long drate)
> +{
> + unsigned long div = DIV_ROUND_UP(prate, drate) - 1;
> +
> + WARN_ON(div >= MAX_DIV);
> + return div;
> +}
> +
> +/*
> + * This notifier function is called for the pre-rate and post-rate change
> + * notifications of the parent clock of cpuclk.
> + */
> +static int exynos_cpuclk_notifier_cb(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct clk_notifier_data *ndata = data;
> + struct exynos_cpuclk *cpuclk = to_exynos_cpuclk_nb(nb);
> + void __iomem *base = cpuclk->ctrl_base + cpuclk->offset;
> + int err = 0;
> +
> + if (event == PRE_RATE_CHANGE)
> + err = cpuclk->pre_rate_cb(ndata, cpuclk, base);
> + else if (event == POST_RATE_CHANGE)
> + err = cpuclk->post_rate_cb(ndata, cpuclk, base);
> +
> + return notifier_from_errno(err);
> +}
> +
> +/* helper function to register a cpu clock */
> +static int __init exynos_cpuclk_register(struct samsung_clk_provider *ctx,
> + unsigned int lookup_id, const char *name, const char *parent,
> + const char *alt_parent, struct device_node *np,
> + const struct exynos_cpuclk_soc_data *soc_data)
> +{
> + struct exynos_cpuclk *cpuclk;
> + struct clk_init_data init;
> + struct clk *clk;
> + void *data;
> + int ret = 0;
> +
> + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
> + if (!cpuclk)
> + return -ENOMEM;
> +
> + data = kmalloc(soc_data->data_size, GFP_KERNEL);
> + if (!data) {
> + ret = -ENOMEM;
> + goto free_cpuclk;
> + }
> +
> + init.name = name;
> + init.flags = CLK_SET_RATE_PARENT;
> + init.parent_names = &parent;
> + init.num_parents = 1;
?? number of parents are 2 with parent and alt-parent. Ignore this
comment if trivial.
> + init.ops = soc_data->ops;
> +
> + cpuclk->hw.init = &init;
> + cpuclk->ctrl_base = ctx->reg_base;
> + cpuclk->lock = &ctx->lock;
> + cpuclk->offset = soc_data->offset;
> + cpuclk->type = soc_data->type;
> + cpuclk->pre_rate_cb = soc_data->pre_rate_cb;
> + cpuclk->post_rate_cb = soc_data->post_rate_cb;
> + memcpy(data, soc_data->data, soc_data->data_size);
> + cpuclk->data = data;
> +
> + cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
> + ret = clk_notifier_register(__clk_lookup(parent), &cpuclk->clk_nb);
> + if (ret) {
> + pr_err("%s: failed to register clock notifier for %s\n",
> + __func__, name);
> + goto free_cpuclk_data;
> + }
> +
> + cpuclk->alt_parent = __clk_lookup(alt_parent);
> + if (!cpuclk->alt_parent) {
> + pr_err("%s: could not lookup alternate parent %s\n",
> + __func__, alt_parent);
> + ret = -EINVAL;
> + goto unregister_clk_nb;
> + }
> +
> + clk = clk_register(NULL, &cpuclk->hw);
> + if (IS_ERR(clk)) {
> + pr_err("%s: could not register cpuclk %s\n", __func__, name);
> + ret = PTR_ERR(clk);
> + goto unregister_clk_nb;
> + }
> +
> + samsung_clk_add_lookup(ctx, clk, lookup_id);
This function is just updating the look up id in one line. Can this
function call be totally removed or made inline?
> + return 0;
> +
> +unregister_clk_nb:
> + clk_notifier_unregister(__clk_lookup(parent), &cpuclk->clk_nb);
> +free_cpuclk_data:
> + kfree(cpuclk->data);
> +free_cpuclk:
> + kfree(cpuclk);
> + return ret;
> +}
> +
> +/*
> + * Helper function to set the 'safe' dividers for the CPU clock. The parameters
> + * div and mask contain the divider value and the register bit mask of the
> + * dividers to be programmed.
> + */
> +static void exynos4210_set_safe_div(void __iomem *base, unsigned long div,
> + unsigned long mask)
> +{
Same comment as above. If renaming this to exynos_set_safe_div makes any sense.
> + unsigned long div0;
> +
> + div0 = readl(base + E4210_DIV_CPU0);
> + div0 = (div0 & ~mask) | div;
> + writel(div0, base + E4210_DIV_CPU0);
> + wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, mask);
> +}
> +
> +/* handler for pre-rate change notification from parent clock */
> +static int exynos4210_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
> + struct exynos_cpuclk *cpuclk, void __iomem *base)
> +{
> + const struct exynos4210_cpuclk_data *cpuclk_data = cpuclk->data;
> + unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
Will this alt_prate ever change and hence can be cached?
> + unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
> + unsigned long div0, div1 = 0, mux_reg;
> + unsigned long flags;
> +
> + /* find out the divider values to use for clock data */
> + while ((cpuclk_data->prate * 1000) != ndata->new_rate) {
> + if (cpuclk_data->prate == 0)
> + return -EINVAL;
> + cpuclk_data++;
Just thinking if these linear searches can be converted to binary search.
> + }
> +
> + /* For the selected PLL clock frequency, get the pre-defined divider
> + * values. If the clock for sclk_hpm is not sourced from apll, then
> + * the values for DIV_COPY and DIV_HPM dividers need not be set.
> + */
> + div0 = cpuclk_data->div0;
> + if (cpuclk->type != EXYNOS5420) {
> + div1 = cpuclk_data->div1;
> + if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) {
> + div1 = readl(base + E4210_DIV_CPU1) &
> + E4210_DIV1_HPM_MASK;
> + div1 |= ((cpuclk_data->div1) & ~E4210_DIV1_HPM_MASK);
> + }
> + }
> +
> + spin_lock_irqsave(cpuclk->lock, flags);
I think this spin_lock_irqsave can be moved slightly up as some
registers are accessed.
> +
> + /*
> + * If the new and old parent clock speed is less than the clock speed
> + * of the alternate parent, then it should be ensured that at no point
> + * the armclk speed is more than the old_prate until the dividers are
> + * set.
> + */
> + if (alt_prate > ndata->old_rate) {
> + alt_div = _calc_div(alt_prate, ndata->old_rate);
> + if (cpuclk->type == EXYNOS4210) {
> + /*
> + * In Exynos4210, ATB clock parent is also mout_core. So
> + * ATB clock also needs to be mantained at safe speed.
> + */
> + alt_div |= E4210_DIV0_ATB_MASK;
> + alt_div_mask |= E4210_DIV0_ATB_MASK;
> + }
> + exynos4210_set_safe_div(base, alt_div, alt_div_mask);
> + div0 |= alt_div;
> + }
> +
> + /* select sclk_mpll as the alternate parent */
> + mux_reg = readl(base + E4210_SRC_CPU);
> + writel(mux_reg | (1 << 16), base + E4210_SRC_CPU);
> + wait_until_mux_stable(base + E4210_STAT_CPU, 16, 2);
> +
> + /* alternate parent is active now. set the dividers */
> + writel(div0, base + E4210_DIV_CPU0);
> + wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
> +
> + if (cpuclk->type != EXYNOS5420) {
> + writel(div1, base + E4210_DIV_CPU1);
> + wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
> + DIV_MASK_ALL);
> + }
> +
> + spin_unlock_irqrestore(cpuclk->lock, flags);
> + return 0;
> +}
> +
> +/* handler for post-rate change notification from parent clock */
> +static int exynos4210_cpuclk_post_rate_change(struct clk_notifier_data *ndata,
> + struct exynos_cpuclk *cpuclk, void __iomem *base)
> +{
> + const struct exynos4210_cpuclk_data *cpuclk_data = cpuclk->data;
> + unsigned long div = 0, div_mask = DIV_MASK;
> + unsigned long mux_reg, flags;
> +
> + spin_lock_irqsave(cpuclk->lock, flags);
> +
> + /* select mout_apll as the alternate parent */
> + mux_reg = readl(base + E4210_SRC_CPU);
> + writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
> + wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
> +
> + if (cpuclk->type == EXYNOS4210) {
> + /* find out the divider values to use for clock data */
> + while ((cpuclk_data->prate * 1000) != ndata->new_rate) {
> + if (cpuclk_data->prate == 0)
> + return -EINVAL;
spin_unlock_irqrestore not called here.
> + cpuclk_data++;
Also can this cpuclk_data be cached in pre rate call.
> + }
> +
> + div |= (cpuclk_data->div0 & E4210_DIV0_ATB_MASK);
> + div_mask |= E4210_DIV0_ATB_MASK;
> + }
> +
> + exynos4210_set_safe_div(base, div, div_mask);
> + spin_unlock_irqrestore(cpuclk->lock, flags);
> + return 0;
> +}
> +
> +static const struct exynos4210_cpuclk_data e4210_armclk_d[] __initconst = {
> + { 1200000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 5), },
> + { 1000000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 4), },
> + { 800000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> + { 500000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> + { 400000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> + { 200000, E4210_CPU_DIV0(0, 1, 1, 1, 3, 1), E4210_CPU_DIV1(0, 3), },
> + { 0 },
> +};
> +
> +static const struct exynos4210_cpuclk_data e5250_armclk_d[] __initconst = {
> + { 1700000, E5250_CPU_DIV0(5, 3, 7, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> + { 1600000, E5250_CPU_DIV0(4, 1, 7, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> + { 1500000, E5250_CPU_DIV0(4, 1, 7, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> + { 1400000, E5250_CPU_DIV0(4, 1, 6, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> + { 1300000, E5250_CPU_DIV0(3, 1, 6, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> + { 1200000, E5250_CPU_DIV0(3, 1, 5, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> + { 1100000, E5250_CPU_DIV0(3, 1, 5, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> + { 1000000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 900000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 800000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 700000, E5250_CPU_DIV0(1, 1, 3, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 600000, E5250_CPU_DIV0(1, 1, 3, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 500000, E5250_CPU_DIV0(1, 1, 2, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 400000, E5250_CPU_DIV0(1, 1, 2, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 300000, E5250_CPU_DIV0(1, 1, 1, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 200000, E5250_CPU_DIV0(1, 1, 1, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> + { 0 },
> +};
> +
> +static const struct exynos4210_cpuclk_data e5420_eglclk_d[] __initconst = {
> + { 1800000, E5420_EGL_DIV0(3, 7, 7, 4), },
> + { 1700000, E5420_EGL_DIV0(3, 7, 7, 3), },
> + { 1600000, E5420_EGL_DIV0(3, 7, 7, 3), },
> + { 1500000, E5420_EGL_DIV0(3, 7, 7, 3), },
> + { 1400000, E5420_EGL_DIV0(3, 7, 7, 3), },
> + { 1300000, E5420_EGL_DIV0(3, 7, 7, 2), },
> + { 1200000, E5420_EGL_DIV0(3, 7, 7, 2), },
> + { 1100000, E5420_EGL_DIV0(3, 7, 7, 2), },
> + { 1000000, E5420_EGL_DIV0(3, 6, 6, 2), },
> + { 900000, E5420_EGL_DIV0(3, 6, 6, 2), },
> + { 800000, E5420_EGL_DIV0(3, 5, 5, 2), },
> + { 700000, E5420_EGL_DIV0(3, 5, 5, 2), },
> + { 600000, E5420_EGL_DIV0(3, 4, 4, 2), },
> + { 500000, E5420_EGL_DIV0(3, 3, 3, 2), },
> + { 400000, E5420_EGL_DIV0(3, 3, 3, 2), },
> + { 300000, E5420_EGL_DIV0(3, 3, 3, 2), },
> + { 200000, E5420_EGL_DIV0(3, 3, 3, 2), },
> + { 0 },
> +};
> +
> +static const struct exynos4210_cpuclk_data e5420_kfcclk_d[] __initconst = {
> + { 1300000, E5420_KFC_DIV(3, 5, 2), },
> + { 1200000, E5420_KFC_DIV(3, 5, 2), },
> + { 1100000, E5420_KFC_DIV(3, 5, 2), },
> + { 1000000, E5420_KFC_DIV(3, 5, 2), },
> + { 900000, E5420_KFC_DIV(3, 5, 2), },
> + { 800000, E5420_KFC_DIV(3, 5, 2), },
> + { 700000, E5420_KFC_DIV(3, 4, 2), },
> + { 600000, E5420_KFC_DIV(3, 4, 2), },
> + { 500000, E5420_KFC_DIV(3, 4, 2), },
> + { 400000, E5420_KFC_DIV(3, 3, 2), },
> + { 300000, E5420_KFC_DIV(3, 3, 2), },
> + { 200000, E5420_KFC_DIV(3, 3, 2), },
> + { 0 },
> +};
> +
> +static const struct exynos_cpuclk_soc_data e4210_clk_soc_data __initconst = {
> + .ops = &exynos_cpuclk_clk_ops,
> + .offset = 0x14200,
> + .data = e4210_armclk_d,
> + .data_size = sizeof(e4210_armclk_d),
> + .type = EXYNOS4210,
> + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> +};
> +
> +static const struct exynos_cpuclk_soc_data e5250_clk_soc_data __initconst = {
> + .ops = &exynos_cpuclk_clk_ops,
> + .offset = 0x200,
> + .data = e5250_armclk_d,
> + .data_size = sizeof(e5250_armclk_d),
> + .type = EXYNOS5250,
> + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> +};
> +
> +static const struct exynos_cpuclk_soc_data e5420_clk_soc_data[] __initconst = {
> + {
> + /* Cluster 0 (A15) CPU clock data */
> + .ops = &exynos_cpuclk_clk_ops,
> + .offset = 0x200,
> + .data = e5420_eglclk_d,
> + .data_size = sizeof(e5420_eglclk_d),
> + .type = EXYNOS5420,
> + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> + }, {
> + /* Cluster 1 (A7) CPU clock data */
> + .ops = &exynos_cpuclk_clk_ops,
> + .offset = 0x28200,
> + .data = e5420_kfcclk_d,
> + .data_size = sizeof(e5420_kfcclk_d),
> + .type = EXYNOS5420,
> + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> + },
> +};
> +
> +static const struct of_device_id exynos_cpuclk_ids[] __initconst = {
> + { .compatible = "samsung,exynos4210-clock",
> + .data = &e4210_clk_soc_data, },
> + { .compatible = "samsung,exynos5250-clock",
> + .data = &e5250_clk_soc_data, },
> + { .compatible = "samsung,exynos5420-clock",
> + .data = &e5420_clk_soc_data, },
> + { },
> +};
> +
> +/**
> + * exynos_register_cpu_clock: register cpu clock with ccf.
> + * @ctx: driver context.
> + * @cluster_id: cpu cluster number to which this clock is connected.
> + * @lookup_id: cpuclk clock output id for the clock controller.
> + * @name: the name of the cpu clock.
> + * @parent: name of the parent clock for cpuclk.
> + * @alt_parent: name of the alternate clock parent.
> + * @np: device tree node pointer of the clock controller.
> + */
> +int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
> + unsigned int cluster_id, unsigned int lookup_id,
> + const char *name, const char *parent,
> + const char *alt_parent, struct device_node *np)
> +{
> + const struct of_device_id *match;
> + const struct exynos_cpuclk_soc_data *data = NULL;
> +
> + if (!np)
> + return -EINVAL;
> +
> + match = of_match_node(exynos_cpuclk_ids, np);
> + if (!match)
> + return -EINVAL;
> +
> + data = match->data;
> + data += cluster_id;
> + return exynos_cpuclk_register(ctx, lookup_id, name, parent,
> + alt_parent, np, data);
> +}
> diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
> index 9693b80..bdeca1d 100644
> --- a/drivers/clk/samsung/clk.h
> +++ b/drivers/clk/samsung/clk.h
> @@ -372,4 +372,9 @@ extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
> const unsigned long *rdump,
> unsigned long nr_rdump);
>
> +extern int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
> + unsigned int cluster_id, unsigned int lookup_id,
> + const char *name, const char *parent,
> + const char *alt_parent, struct device_node *np);
> +
> #endif /* __SAMSUNG_CLK_H */
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list