[PATCH v4 01/13] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent

[Heiko Stübner]

From: Boris BREZILLON <b.brezillon at overkiz.com>

In case the rate_hw does not implement determine_rate, but only round_rate
we fallback to best_parent selection if mux_hw is present and support
reparenting.

Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>

This also fixes a rate calculation problem when using the standard div and
mux ops, as in this case currently only the mux->determine_rate is used
in the composite rate calculation.
So when for example the composite clock has two parents at 600 and 800MHz,
the requested rate is 75MHz, which the divider could provide, without this
change the rate would be set 600MHz ignoring the divider completely.
This may be way out of spec for the component.

[fixed the output to actually return a rate instead of the diff]
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 drivers/clk/clk-composite.c | 51 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 57a078e..0a4cd21 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -64,11 +64,59 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
 	const struct clk_ops *mux_ops = composite->mux_ops;
 	struct clk_hw *rate_hw = composite->rate_hw;
 	struct clk_hw *mux_hw = composite->mux_hw;
+	struct clk *parent;
+	unsigned long parent_rate;
+	long tmp_rate, best_rate;
+	unsigned long rate_diff;
+	unsigned long best_rate_diff = ULONG_MAX;
+	int i;
 
 	if (rate_hw && rate_ops && rate_ops->determine_rate) {
 		rate_hw->clk = hw->clk;
 		return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
 						best_parent_p);
+	} else if (rate_hw && rate_ops && rate_ops->round_rate &&
+		   mux_hw && mux_ops && mux_ops->set_parent) {
+		*best_parent_p = NULL;
+
+		if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
+			*best_parent_p = clk_get_parent(mux_hw->clk);
+			*best_parent_rate = __clk_get_rate(*best_parent_p);
+
+			return rate_ops->round_rate(rate_hw, rate,
+						    best_parent_rate);
+		}
+
+		for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
+			parent = clk_get_parent_by_index(mux_hw->clk, i);
+			if (!parent)
+				continue;
+
+			parent_rate = __clk_get_rate(parent);
+
+			tmp_rate = rate_ops->round_rate(rate_hw, rate,
+							&parent_rate);
+			if (tmp_rate < 0)
+				continue;
+
+			if (tmp_rate < rate)
+				rate_diff = rate - tmp_rate;
+			else
+				rate_diff = tmp_rate - rate;
+
+			if (!rate_diff || !*best_parent_p
+				       || best_rate_diff > rate_diff) {
+				*best_parent_p = parent;
+				*best_parent_rate = parent_rate;
+				best_rate_diff = rate_diff;
+				best_rate = tmp_rate;
+			}
+
+			if (!rate_diff)
+				return rate;
+		}
+
+		return best_rate;
 	} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
 		mux_hw->clk = hw->clk;
 		return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
@@ -196,7 +244,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
 		composite->rate_hw = rate_hw;
 		composite->rate_ops = rate_ops;
 		clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
-		if (rate_ops->determine_rate)
+		if (rate_ops->determine_rate ||
+		    (rate_ops->round_rate && clk_composite_ops->set_parent))
 			clk_composite_ops->determine_rate = clk_composite_determine_rate;
 	}
 
-- 
1.9.0