[PATCH V4 1/3] gpio: Add APM X-Gene SoC GPIO controller support
Alexandre Courbot
gnurou at gmail.com
Sat Jun 21 00:39:42 PDT 2014
On Thu, Jun 19, 2014 at 9:08 AM, Feng Kan <fkan at apm.com> wrote:
> Add APM X-Gene SoC gpio controller driver.
>
> Signed-off-by: Feng Kan <fkan at apm.com>
> ---
> drivers/gpio/Kconfig | 9 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-xgene.c | 252 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 262 insertions(+)
> create mode 100644 drivers/gpio/gpio-xgene.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 4a1b511..833996a02 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -334,6 +334,15 @@ config GPIO_TZ1090_PDC
> help
> Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
>
> +config GPIO_XGENE
> + bool "APM X-Gene GPIO controller support"
> + depends on ARM64 && OF_GPIO
> + help
> + This driver is to support the GPIO block within the APM X-Gene SoC
> + platform's generic flash controller. The GPIO pins are muxed with
> + the generic flash controller's address and data pins. Say yes
> + here to enable the GFC GPIO functionality.
> +
> config GPIO_XILINX
> bool "Xilinx GPIO support"
> depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index d10f6a9..1bf5f82 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -98,6 +98,7 @@ obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
> obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
> obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
> obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
> +obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
> obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
> obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
> obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
> diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
> new file mode 100644
> index 0000000..3a747cc
> --- /dev/null
> +++ b/drivers/gpio/gpio-xgene.c
> @@ -0,0 +1,252 @@
> +/*
> + * AppliedMicro X-Gene SoC GPIO Driver
> + *
> + * Copyright (c) 2014, Applied Micro Circuits Corporation
> + * Author: Feng Kan <fkan at apm.com>.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of.h>
> +#include <linux/gpio.h>
Please use the new GPIO headers, linux/gpio/driver.h. I also don't
think you will need of_gpio.h with it.
> +#include <linux/types.h>
> +#include <linux/clk.h>
Why is clk.h needed here?
Apart from these minor points I guess I have nothing to complain about
for this version. :)
Reviewed-by: Alexandre Courbot <acourbot at nvidia.com>
More information about the linux-arm-kernel
mailing list