[PATCH] ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.

[Shawn Guo]

On Wed, Jun 18, 2014 at 02:56:56PM +0200, Denis Carikli wrote:
> The following commit:
> 89d7e5c mmc: sdhci-esdhc-imx: add runtime pm support
> has the effect of also disabling the hardware card detect
> in runtime pm.
> 
> We switch to GPIO based detection to avoid this issue.
> 
> This patch is based on:
> ARM: dts: imx51-babbage: Fix esdhc setup
> 
> Signed-off-by: Denis Carikli <denis at eukrea.com>
> ---
>  .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
> index 75e66c9..1d77381 100644
> --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
> +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
> @@ -108,6 +108,8 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
>  	fsl,cd-controller;

The property should be dropped now.

> +	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> +

This new line is not really necessary.

I fixed them up when applying.

Shawn

>  	status = "okay";
>  };
>  
> @@ -206,7 +208,7 @@
>  
>  		pinctrl_esdhc1_cd: esdhc1_cd {
>  			fsl,pins = <
> -				MX51_PAD_GPIO1_0__SD1_CD 0x20d5
> +				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
>  			>;
>  		};
>  
> -- 
> 1.7.9.5
>