[PATCHv4 1/4] ARM: Kirkwood: Add setup file for netxbig LEDs

[Jason Cooper]

On Mon, May 26, 2014 at 09:29:48PM +0200, Andrew Lunn wrote:
> There is currently no DT binding for the CPLD which controls the LEDs
> on the Net 2Big and Net 5Big. So use a platform device.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> v3-v4:
>   rename board-nextbig.c to nextbig.c
> ---
>  arch/arm/mach-mvebu/Kconfig    |   7 ++
>  arch/arm/mach-mvebu/Makefile   |   1 +
>  arch/arm/mach-mvebu/board.h    |   5 ++
>  arch/arm/mach-mvebu/kirkwood.c |   3 +
>  arch/arm/mach-mvebu/netxbig.c  | 191 +++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 207 insertions(+)
>  create mode 100644 arch/arm/mach-mvebu/netxbig.c

Applied to mvebu/soc

thx,

Jason.