[PATCH] arm: use cpu_online_mask when using forced irq_set_affinity

[Russell King - ARM Linux]

On Fri, Jun 20, 2014 at 02:04:52PM +0100, Sudeep Holla wrote:
> Hi Russell,
>
> On 23/05/14 13:51, Sudeep Holla wrote:
>>
>>
>> On 23/05/14 13:10, Russell King - ARM Linux wrote:
>>> On Fri, May 09, 2014 at 05:40:40PM +0100, Sudeep Holla wrote:
>>>> From: Sudeep Holla <sudeep.holla at arm.com>
>>>>
>>>> Commit 01f8fa4f01d8("genirq: Allow forcing cpu affinity of interrupts")
>>>> enabled the forced irq_set_affinity which previously refused to route an
>>>> interrupt to an offline cpu.
>>>>
>>>> Commit ffde1de64012("irqchip: Gic: Support forced affinity setting")
>>>> implements this force logic and disables the cpu online check for GIC
>>>> interrupt controller.
>>>>
>>>> When __cpu_disable calls migrate_irqs, it disables the current cpu in
>>>> cpu_online_mask and uses forced irq_set_affinity to migrate the IRQs
>>>> away from the cpu but passes affinity mask with the cpu being offlined
>>>> also included in it.
>>>>
>>>> When calling irq_set_affinity with force == true in a cpu hotplug path,
>>>> the caller must ensure that the cpu being offlined is not present in the
>>>> affinity mask or it may be selected as the target CPU, leading to the
>>>> interrupt not being migrated.
>>>>
>>>> This patch uses cpu_online_mask when using forced irq_set_affinity so
>>>> that the IRQs are properly migrated away.
>>>>
>>>> Tested on TC2 hotpluging CPU0 in and out. Without this patch the system
>>>> locks up as the IRQs are not migrated away from CPU0.
>>>
>>> You don't explain /how/ this happens, and I'm not convinced that you've
>>> properly diagnosed this bug.
>>>
>>
>> Sorry for not being elaborate enough.
>> - On boot by default all the irqs have cpu_online_mask as affinity
>> - Now if CPU0 is being hotplugged out, CPU0 is removed from cpu_online_mask
>>     and migrate_irqs is called
>> - In migrate_one_irq, when affinity is read from the irq_desc, it still contains
>>     CPU0 which is expected.
>> - irq_set_affinity is called with affinity with CPU0 set and force = true,
>>     which chooses CPU0 resulting in not migrating the IRQ.
>>
>>>> @@ -155,11 +155,15 @@ static bool migrate_one_irq(struct irq_desc *desc)
>>>>    	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
>>>>    		return false;
>>>>
>>>> -	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
>>>> -		affinity = cpu_online_mask;
>>>> +	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids)
>>>>    		ret = true;
>>>> -	}
>>>
>>> The idea here with the original code is:
>>>
>>> - if the current CPU (which is the one being offlined) is not in the
>>>     affinity mask, do nothing.
>>> - if "affinity & cpu_online_mask" indicates that there's no CPUs in the
>>>     new set (cpu_online_mask must have been updated to indicate that the
>>>     current CPU is offline) then re-set the affinity mask and report that
>>>     we forced a change.
>>> - otherwise, re-set the existing affinity (which will force the IRQ
>>>     controller to re-evaluate it's routing given the affinity and online
>>>     CPUs.)
>>>
>>
>> I completely understand the above idea, except that the new feature added
>> to allow forced affinity setting(as mentioned in the commit log by 2 commits),
>> changes the behaviour of last step.
>>
>> IRQ controller now re-evaluates it's routing based on the given affinity alone
>> and doesn't consider online CPUs when force = true is set. This will result in
>> the CPU being offlined chosen as the target if it happens to be the first in the
>> affinity mask.
>>
>>> This code is correct.  In fact, changing it as you have, you /always/
>>> reset the affinity mask whether or not the CPU being offlined is the
>>> last CPU in the affinity set.
>>>
>>> If you are finding that CPU0 is left with interrupts afterwards, the
>>> bug lies elsewhere - probably in the IRQ controller code.
>>>
>>
>> Since the IRQ controller code is changed to provide that feature, either
>> - we have to choose not to use forced option, or
>> - we need to make sure we pass valid affinity mask with force = true option
>>
>> I chose latter in this patch. Let me know your opinion.
>>
>
> Any suggestions on this ? Since commit 01f8fa4f01d8 and ffde1de64012 are now in
> stable releases, CPU0 hotplug is broken there now.

Maybe we should ask Thomas, as he's (a) the maintainer of the irqchip
stuff, and (b) the author of the patch causing the breakage.

>From what I can see looking at the x86 code, the work-around in
ffde1de64012 is wrong.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.