[PATCH v2 06/18] ARM: dts: DRA7: Add divider table to optfclk_pciephy_div clock

[Tero Kristo]

On 06/19/2014 03:45 PM, Kishon Vijay Abraham I wrote:
> Hi Tero,
>
> On Thursday 19 June 2014 04:40 PM, Tero Kristo wrote:
>> On 05/29/2014 09:38 AM, Kishon Vijay Abraham I wrote:
>>> From: Keerthy <j-keerthy at ti.com>
>>>
>>> Add divider table to optfclk_pciephy_div clock. The Documentation
>>> for divider clock can be found at ../clock/ti/divider.txt
>>
>> This patch requires a better changelog. Why is the change done, any TRM refs etc.?
>
> The 8th bit of CM_CLKMODE_APLL_PCIE can be programmed to either 0x0 or 0x1
> based on if the divider value is 0x2 or 0x1.
>
> Figure 26-21. PCIe PHY Clock Generator Overview in vE of DRA7xx ES1.0 shows the
> block diagram of Clock Generator Subsystem of PCIe PHY module. We have to do a
> bypass (divided by 1) in order to get the correct PCIE_PHY_DIV_GCLK

Yes, something like this on the changelog would be good.

-Tero

> frequency.
>
> Thanks
> Kishon
>>
>> -Tero
>>
>>>
>>> Cc: Rajendra Nayak <rnayak at ti.com>
>>> Cc: Tero Kristo <t-kristo at ti.com>
>>> Cc: Paul Walmsley <paul at pwsan.com>
>>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>>> ---
>>>    arch/arm/boot/dts/dra7xx-clocks.dtsi |    1 +
>>>    1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>>> b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>>> index c767687..55e95c5 100644
>>> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>>> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>>> @@ -1170,6 +1170,7 @@
>>>            clocks = <&apll_pcie_ck>;
>>>            #clock-cells = <0>;
>>>            reg = <0x021c>;
>>> +        ti,dividers = <2>, <1>;
>>>            ti,bit-shift = <8>;
>>>            ti,max-div = <2>;
>>>        };
>>>
>>