[STLinux Kernel] [PATCH 4/7] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E

[Lee Jones]

> > > Why are you only enabling this for rev-E board?
> > 
> > Purely for testing purposes, as it's the only board I have.  If
> > anyone has the other revisions and would be happy to test the driver
> > for me then great.
> 
> Ok that's what I suspected.
> 
> If you tell me how, I can test on a Rev C board. But as there are several other 
> revisions I think checking the board schematics would be the quickest way forward.

Great.  Do you have a oscilloscope/logic analyser?

> > > If you make the stih415 DT PWM nodes part of this series as well, then 
> > > assuming there is no good reason to the contary, the PWM could 
> > > be enabled for both stih415/6 in the common stih41x-b2020 DTS file which
> > > is also included by rev-E (assuming that PWM wiring is not some rev-E specific
> > > thing).
> 
> Can you add the stih415 bindings in V2 as well?

Who's using Orly1?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog