[PATCH v2 10/18] ARM: dts: dra7xx-clocks: Add missing 32khz clocks used for PHY

[Tero Kristo]

On 05/29/2014 09:38 AM, Kishon Vijay Abraham I wrote:
> Added missing 32khz clock used by PCIe PHY.
> The documention for this node can be found @ ../bindings/clock/ti/gate.txt.

You can drop the node documentation ref, and rather add a TRM reference 
about hardware details. Other than that, looks good to me.

-Tero

>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Rajendra Nayak <rnayak at ti.com>
> Cc: Tero Kristo <t-kristo at ti.com>
> Cc: Paul Walmsley <paul at pwsan.com>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Kumar Gala <galak at codeaurora.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>   arch/arm/boot/dts/dra7xx-clocks.dtsi |    8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index 44993ec..e1bd052 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1165,6 +1165,14 @@
>   		reg = <0x021c>, <0x0220>;
>   	};
>
> +	optfclk_pciephy_32khz: optfclk_pciephy_32khz at 4a0093b0 {
> +		compatible = "ti,gate-clock";
> +		clocks = <&sys_32k_ck>;
> +		#clock-cells = <0>;
> +		reg = <0x13b0>;
> +		ti,bit-shift = <8>;
> +	};
> +
>   	optfclk_pciephy_div: optfclk_pciephy_div at 4a00821c {
>   		compatible = "ti,divider-clock";
>   		clocks = <&apll_pcie_ck>;
>