[PATCH v4 5/6] drivers: cpuidle: CPU idle ARM64 driver
Rob Herring
robherring2 at gmail.com
Wed Jun 18 20:02:18 PDT 2014
On Wed, Jun 11, 2014 at 11:18 AM, Lorenzo Pieralisi
<lorenzo.pieralisi at arm.com> wrote:
> This patch implements a generic CPU idle driver for ARM64 machines.
I fail to see anything arm64 specific here. The idle states binding is
for both arm32 and arm64, right? If not, please make it for both.
Otherwise, I'm okay with the binding for the most part. I need to take
another pass at it though.
Rob
> It relies on the DT idle states infrastructure to initialize idle
> states count and respective parameters. Current code assumes the driver
> is managing idle states on all possible CPUs but can be easily
> generalized to support heterogenous systems and build cpumasks at
> runtime using MIDRs or DT cpu nodes compatible properties.
>
> Suspend back-ends (eg PSCI) must register a suspend initializer with
> the CPU idle driver so that the suspend backend call can be detected,
> and the driver code can call the back-end infrastructure to complete the
> suspend backend initialization.
>
> Idle state index 0 is always initialized as a simple wfi state, ie always
> considered present and functional on all ARM64 platforms.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> ---
> drivers/cpuidle/Kconfig | 5 ++
> drivers/cpuidle/Kconfig.arm64 | 13 ++++
> drivers/cpuidle/Makefile | 4 +
> drivers/cpuidle/cpuidle-arm64.c | 168 ++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 190 insertions(+)
> create mode 100644 drivers/cpuidle/Kconfig.arm64
> create mode 100644 drivers/cpuidle/cpuidle-arm64.c
>
> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> index 760ce20..360c086 100644
> --- a/drivers/cpuidle/Kconfig
> +++ b/drivers/cpuidle/Kconfig
> @@ -44,6 +44,11 @@ depends on ARM
> source "drivers/cpuidle/Kconfig.arm"
> endmenu
>
> +menu "ARM64 CPU Idle Drivers"
> +depends on ARM64
> +source "drivers/cpuidle/Kconfig.arm64"
> +endmenu
> +
> menu "MIPS CPU Idle Drivers"
> depends on MIPS
> source "drivers/cpuidle/Kconfig.mips"
> diff --git a/drivers/cpuidle/Kconfig.arm64 b/drivers/cpuidle/Kconfig.arm64
> new file mode 100644
> index 0000000..b83612c
> --- /dev/null
> +++ b/drivers/cpuidle/Kconfig.arm64
> @@ -0,0 +1,13 @@
> +#
> +# ARM64 CPU Idle drivers
> +#
> +
> +config ARM64_CPUIDLE
> + bool "Generic ARM64 CPU idle Driver"
> + select OF_IDLE_STATES
> + help
> + Select this to enable generic cpuidle driver for ARM v8.
> + It provides a generic idle driver whose idle states are configured
> + at run-time through DT nodes. The CPUidle suspend backend is
> + initialized by the device tree parsing code on matching the entry
> + method to the respective CPU operations.
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index d5ebf4b..e496242 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -23,6 +23,10 @@ obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o
> obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o
>
> ###############################################################################
> +# ARM64 drivers
> +obj-$(CONFIG_ARM64_CPUIDLE) += cpuidle-arm64.o
> +
> +###############################################################################
> # POWERPC drivers
> obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o
> obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o
> diff --git a/drivers/cpuidle/cpuidle-arm64.c b/drivers/cpuidle/cpuidle-arm64.c
> new file mode 100644
> index 0000000..4c932f8
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-arm64.c
> @@ -0,0 +1,168 @@
> +/*
> + * ARM64 generic CPU idle driver.
> + *
> + * Copyright (C) 2014 ARM Ltd.
> + * Author: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "CPUidle arm64: " fmt
> +
> +#include <linux/cpuidle.h>
> +#include <linux/cpumask.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include <asm/psci.h>
> +#include <asm/suspend.h>
> +
> +#include "of_idle_states.h"
> +
> +typedef int (*suspend_init_fn)(struct cpuidle_driver *,
> + struct device_node *[]);
> +
> +struct cpu_suspend_ops {
> + const char *id;
> + suspend_init_fn init_fn;
> +};
> +
> +static const struct cpu_suspend_ops suspend_operations[] __initconst = {
> + {"arm,psci", psci_dt_register_idle_states},
> + {}
> +};
> +
> +static __init const struct cpu_suspend_ops *get_suspend_ops(const char *str)
> +{
> + int i;
> +
> + if (!str)
> + return NULL;
> +
> + for (i = 0; suspend_operations[i].id; i++)
> + if (!strcmp(suspend_operations[i].id, str))
> + return &suspend_operations[i];
> +
> + return NULL;
> +}
> +
> +/*
> + * arm_enter_idle_state - Programs CPU to enter the specified state
> + *
> + * dev: cpuidle device
> + * drv: cpuidle driver
> + * idx: state index
> + *
> + * Called from the CPUidle framework to program the device to the
> + * specified target state selected by the governor.
> + */
> +static int arm_enter_idle_state(struct cpuidle_device *dev,
> + struct cpuidle_driver *drv, int idx)
> +{
> + int ret;
> +
> + if (!idx) {
> + cpu_do_idle();
> + return idx;
> + }
> +
> + cpu_pm_enter();
> + /*
> + * Pass idle state index to cpu_suspend which in turn will call
> + * the CPU ops suspend protocol with idle index as a parameter.
> + *
> + * Some states would not require context to be saved and flushed
> + * to DRAM, so calling cpu_suspend would not be stricly necessary.
> + * When power domains specifications for ARM CPUs are finalized then
> + * this code can be optimized to prevent saving registers if not
> + * needed.
> + */
> + ret = cpu_suspend(idx);
> +
> + cpu_pm_exit();
> +
> + return ret ? -1 : idx;
> +}
> +
> +struct cpuidle_driver arm64_idle_driver = {
> + .name = "arm64_idle",
> + .owner = THIS_MODULE,
> +};
> +
> +static struct device_node *state_nodes[CPUIDLE_STATE_MAX] __initdata;
> +
> +/*
> + * arm64_idle_init
> + *
> + * Registers the arm64 specific cpuidle driver with the cpuidle
> + * framework. It relies on core code to parse the idle states
> + * and initialize them using driver data structures accordingly.
> + */
> +static int __init arm64_idle_init(void)
> +{
> + int i, ret;
> + const char *entry_method;
> + struct device_node *idle_states_node;
> + const struct cpu_suspend_ops *suspend_init;
> + struct cpuidle_driver *drv = &arm64_idle_driver;
> +
> + idle_states_node = of_find_node_by_path("/cpus/idle-states");
> + if (!idle_states_node)
> + return -ENOENT;
> +
> + if (of_property_read_string(idle_states_node, "entry-method",
> + &entry_method)) {
> + pr_warn(" * %s missing entry-method property\n",
> + idle_states_node->full_name);
> + of_node_put(idle_states_node);
> + ret = -EOPNOTSUPP;
> + goto put_node;
> + }
> +
> + suspend_init = get_suspend_ops(entry_method);
> + if (!suspend_init) {
> + pr_warn("Missing suspend initializer\n");
> + ret = -EOPNOTSUPP;
> + goto put_node;
> + }
> +
> + /*
> + * State at index 0 is standby wfi and considered standard
> + * on all ARM platforms. If in some platforms simple wfi
> + * can't be used as "state 0", DT bindings must be implemented
> + * to work around this issue and allow installing a special
> + * handler for idle state index 0.
> + */
> + drv->states[0].exit_latency = 1;
> + drv->states[0].target_residency = 1;
> + drv->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
> + strncpy(drv->states[0].name, "ARM WFI", CPUIDLE_NAME_LEN);
> + strncpy(drv->states[0].desc, "ARM WFI", CPUIDLE_DESC_LEN);
> +
> + drv->cpumask = (struct cpumask *) cpu_possible_mask;
> + /*
> + * Start at index 1, request idle state nodes to be filled
> + */
> + ret = of_init_idle_driver(drv, state_nodes, 1, true);
> + if (ret)
> + goto put_node;
> +
> + if (suspend_init->init_fn(drv, state_nodes)) {
> + ret = -EOPNOTSUPP;
> + goto put_node;
> + }
> +
> + for (i = 0; i < drv->state_count; i++)
> + drv->states[i].enter = arm_enter_idle_state;
> +
> + ret = cpuidle_register(drv, NULL);
> +
> +put_node:
> + of_node_put(idle_states_node);
> + return ret;
> +}
> +device_initcall(arm64_idle_init);
> --
> 1.8.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list