[GIT PULL] at91: fixes for 3.16 (drivers) #1
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Jun 17 01:42:41 PDT 2014
Arnd, Olof, Kevin,
As advised by Olof, here is the interesting updated on PWM drivers for AT91
resent after 3.16-rc1 release. Delaying the inclusion of this material has
solved all the issues with dependecies that previous pull-request had ([GIT
PULL] at91: drivers for 3.16 #1).
I remind you what it's about: Alexandre did a great job replacing the existing
calls to the older, non-standard drivers by the use of the newer "pwm-atmel"
which takes advantage of the PWM framework.
In addition of removing three obsolete drivers, it also solves an issue with
non existing Kconfig symbols introduced by (misc: atmel_pwm: only build for
supported platforms) which was trying to avoid a build failure... so, all in
all, a pretty good thing!
The diffstat is pretty nice as well ;-)
Thanks, best regards,
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git tags/at91-fixes
for you to fetch changes up to be6ef50d11bfeec5cce3cf6b463f9094fad1de14:
misc: atmel_pwm: remove obsolete driver (2014-06-17 10:24:08 +0200)
----------------------------------------------------------------
Atmel PWM driver update for 3.16
- move to the new PWM driver which uses PWM framework
- remove 3 obsolete drivers (atmel-pwm-bl.c, leds-atmel-pwm.c and atmel_pwm.c)
----------------------------------------------------------------
Alexandre Belloni (15):
ARM: at91: at91sam9g45: switch to generic PWM framework
ARM: at91: sam9m10g45ek: use generic leds_pwm driver
ARM: at91: at91sam9263: switch to generic PWM framework
ARM: at91: sam9263ek: use generic leds_pwm driver
ARM: at91: at91sam9rl: switch to generic PWM framework
ARM: at91: remove useless at91_pwm_leds()
PWM: atmel: allow building for AVR32
avr32/at32ap: switch to the generic PWM framework
avr32: MRMT: use generic leds_pwm driver
avr32: merisc: use generic leds_pwm driver
avr32: favr-32: use generic pwm_bl driver
avr32: update defconfig to use the generic PWM framework
backlight: atmel-pwm-bl: remove obsolete driver
leds: atmel-pwm: remove obsolete driver
misc: atmel_pwm: remove obsolete driver
arch/arm/mach-at91/at91sam9263.c | 1 +
arch/arm/mach-at91/at91sam9263_devices.c | 11 +-
arch/arm/mach-at91/at91sam9g45.c | 1 +
arch/arm/mach-at91/at91sam9g45_devices.c | 11 +-
arch/arm/mach-at91/at91sam9rl.c | 1 +
arch/arm/mach-at91/at91sam9rl_devices.c | 11 +-
arch/arm/mach-at91/board-sam9263ek.c | 55 +++-
arch/arm/mach-at91/board-sam9m10g45ek.c | 42 ++-
arch/arm/mach-at91/board.h | 1 -
arch/arm/mach-at91/leds.c | 37 ---
arch/avr32/boards/atngw100/mrmt.c | 34 ++-
arch/avr32/boards/favr-32/setup.c | 48 ++--
arch/avr32/boards/merisc/setup.c | 34 ++-
arch/avr32/configs/atngw100_mrmt_defconfig | 5 +-
arch/avr32/configs/atstk1002_defconfig | 5 +-
arch/avr32/configs/atstk1003_defconfig | 5 +-
arch/avr32/configs/atstk1004_defconfig | 5 +-
arch/avr32/configs/atstk1006_defconfig | 5 +-
arch/avr32/configs/favr-32_defconfig | 6 +-
arch/avr32/configs/merisc_defconfig | 5 +-
arch/avr32/mach-at32ap/at32ap700x.c | 7 +-
drivers/leds/Kconfig | 8 -
drivers/leds/Makefile | 1 -
drivers/leds/leds-atmel-pwm.c | 149 -----------
drivers/misc/Kconfig | 10 -
drivers/misc/Makefile | 1 -
drivers/misc/atmel_pwm.c | 402 -----------------------------
drivers/pwm/Kconfig | 2 +-
drivers/video/backlight/Kconfig | 11 -
drivers/video/backlight/Makefile | 1 -
drivers/video/backlight/atmel-pwm-bl.c | 223 ----------------
include/linux/atmel-pwm-bl.h | 43 ---
include/linux/atmel_pwm.h | 70 -----
33 files changed, 186 insertions(+), 1065 deletions(-)
delete mode 100644 drivers/leds/leds-atmel-pwm.c
delete mode 100644 drivers/misc/atmel_pwm.c
delete mode 100644 drivers/video/backlight/atmel-pwm-bl.c
delete mode 100644 include/linux/atmel-pwm-bl.h
delete mode 100644 include/linux/atmel_pwm.h
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list