[PATCH 3/5] clk: Add driver for Maxim 77802 PMIC clocks

[Lee Jones]

> The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with
> Low Jitter Mode. This patch adds support for these two clocks.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> ---
>  .../devicetree/bindings/clock/maxim,max77802.txt   |  40 ++++
>  drivers/clk/Kconfig                                |   6 +
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/clk-max77802.c                         | 253 +++++++++++++++++++++
>  drivers/mfd/max77802.c                             |   3 +
>  include/dt-bindings/clock/maxim,max77802.h         |  22 ++
>  6 files changed, 325 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
>  create mode 100644 drivers/clk/clk-max77802.c
>  create mode 100644 include/dt-bindings/clock/maxim,max77802.h

[...]

> diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
> index 59696dd..33e8023 100644
> --- a/drivers/mfd/max77802.c
> +++ b/drivers/mfd/max77802.c
> @@ -35,6 +35,9 @@
>  
>  static const struct mfd_cell max77802_devs[] = {
>  	{ .name = "max77802-pmic", },
> +#if defined(CONFIG_COMMON_CLK_MAX77802)

No, don't do that.  If COMMON_CLK_MAX77802 is not defined it just
won't be matched, which is enough to ensure it won't be probed.

> +	{ .name = "max77802-clk", },
> +#endif
>  };

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog