[PATCH 2/3] mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()

[Ulf Hansson]

This patch won't change the behavior of how mmci deals with CMD irqs.
By moving code from mmci_irq() to mmci_cmd_irq(), we getter a better
overview of what going on.

Cc: Peter Maydell <peter.maydell at linaro.org>
Cc: John Stultz <john.stultz at linaro.org>
Cc: Russell King <linux at arm.linux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
 drivers/mmc/host/mmci.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a723ed2..5d20bfba 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -960,9 +960,17 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	     unsigned int status)
 {
 	void __iomem *base = host->base;
-	bool sbc = (cmd == host->mrq->sbc);
-	bool busy_resp = host->variant->busy_detect &&
-			(cmd->flags & MMC_RSP_BUSY);
+	bool sbc, busy_resp;
+
+	if (!cmd)
+		return;
+
+	sbc = (cmd == host->mrq->sbc);
+	busy_resp = host->variant->busy_detect && (cmd->flags & MMC_RSP_BUSY);
+
+	if (!((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
+		MCI_CMDSENT|MCI_CMDRESPEND)))
+		return;
 
 	/* Check if we need to wait for busy completion. */
 	if (host->busy_status && (status & MCI_ST_CARDBUSY))
@@ -1209,8 +1217,6 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 	spin_lock(&host->lock);
 
 	do {
-		struct mmc_command *cmd;
-
 		status = readl(host->base + MMCISTATUS);
 
 		if (host->singleirq) {
@@ -1230,11 +1236,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 
 		dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
 
-		cmd = host->cmd;
-		if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
-			MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
-			mmci_cmd_irq(host, cmd, status);
-
+		mmci_cmd_irq(host, host->cmd, status);
 		mmci_data_irq(host, host->data, status);
 
 		/* Don't poll for busy completion in irq context. */
-- 
1.7.9.5