[PATCH 2/2] arm: dts: add support for AM437x StarterKit

[Tony Lindgren]

* Felipe Balbi <balbi at ti.com> [140613 09:33]:
> On Fri, Jun 13, 2014 at 11:23:34AM -0500, Felipe Balbi wrote:
> > On Fri, Jun 13, 2014 at 11:15:47AM -0500, Felipe Balbi wrote:
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> > > @@ -0,0 +1,539 @@
> > > +/*
> > > + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + */
> > > +
> > > +/* AM437x SK EVM */
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "am4372.dtsi"
> > > +#include <dt-bindings/pinctrl/am43xx.h>
> > > +#include <dt-bindings/pwm/pwm.h>
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/input/input.h>
> > > +
> > > +/ {
> > > +	model = "TI AM437x SK EVM";
> > > +	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
> > > +
> > > +	aliases {
> > > +		display0 = &lcd0;
> > > +	};
> > > +
> > > +	vmmcsd_fixed: fixedregulator-sd {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "vmmcsd_fixed";
> > > +		regulator-min-microvolt = <3300000>;
> > > +		regulator-max-microvolt = <3300000>;
> > > +		enable-active-high;
> > > +	};
> > > +
> > > +	v33_fixed: fixedregulator-v33 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "v33_fixed";
> > > +		regulator-min-microvolt = <3300000>;
> > > +		regulator-max-microvolt = <3300000>;
> > > +		enable-active-high;
> > > +	};
> > > +
> > > +	v18_fixed: fixedregulator-v18 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "v18_fixed";
> > > +		regulator-min-microvolt = <1800000>;
> > > +		regulator-max-microvolt = <1800000>;
> > > +		enable-active-high;
> > > +	};

Chances are these are not fixed regulators.. Typically the these
come from external regulators controlled by GPIO pins. Sounds
like you have the schematics so it would be best to verify it.
If they come from something not yet supported, let's at least
document it with comments.

Also looks like all the am43xx boards are using vmmcsd_fixed,
might be worth checking those as well while at it.

Regards,

Tony