[PATCH] ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

[Paul Walmsley]

Dave,

On Mon, 9 Jun 2014, Dave Gerlach wrote:

> am43xx reset register layout is more similar to am33xx than omap4 so
> use the am33xx functions for hwmod hardreset soc_ops rather than the
> currently used omap4 functions. Without this, assert_hardreset and
> deassert_hardreset will not work on am43xx.
> 
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index 66c60fe..1c0885b 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void)
>  		soc_ops.enable_module = _omap4_enable_module;
>  		soc_ops.disable_module = _omap4_disable_module;
>  		soc_ops.wait_target_ready = _omap4_wait_target_ready;
> -		soc_ops.assert_hardreset = _omap4_assert_hardreset;
> -		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
> -		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
> +		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
> +		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
> +		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
>  		soc_ops.init_clkdm = _init_clkdm;
>  	} else if (soc_is_am33xx()) {
>  		soc_ops.enable_module = _am33xx_enable_module;

Should AM43XX be using the _am33xx_{enable,disable}_module and 
wait_target_ready functions?  


- Paul