[PATCH v4 3/6] drivers: cpuidle: implement OF based idle states infrastructure

[Preeti U Murthy]

Hi Lorenzo,

On 06/12/2014 02:33 PM, Lorenzo Pieralisi wrote:
> [CC'ing Preeti and Paul to check their opinions]
> 
> Hi Rafael,
> 
> On Wed, Jun 11, 2014 at 07:25:49PM +0100, Rafael J. Wysocki wrote:
>> On Wed, Jun 11, 2014 at 6:18 PM, Lorenzo Pieralisi
>> <lorenzo.pieralisi at arm.com> wrote:
>>> On most common ARM systems, the low-power states a CPU can be put into are
>>> not discoverable in HW and require device tree bindings to describe
>>> power down suspend operations and idle states parameters.
>>>
>>> In order to enable DT based idle states and configure idle drivers, this
>>> patch implements the bulk infrastructure required to parse the device tree
>>> idle states bindings and initialize the corresponding CPUidle driver states
>>> data.
>>>
>>> Code that initializes idle states checks the CPU idle driver cpumask so
>>> that multiple CPU idle drivers can be initialized through it in the
>>> kernel. The CPU idle driver cpumask defines which idle states should be
>>> considered valid for the driver, ie idle states that are valid on a set
>>> of cpus the idle driver manages.
>>>
>>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
>>> ---
>>>  drivers/cpuidle/Kconfig          |   9 ++
>>>  drivers/cpuidle/Makefile         |   1 +
>>>  drivers/cpuidle/of_idle_states.c | 282 +++++++++++++++++++++++++++++++++++++++
>>>  drivers/cpuidle/of_idle_states.h |   8 ++
>>>  4 files changed, 300 insertions(+)
>>>  create mode 100644 drivers/cpuidle/of_idle_states.c
>>>  create mode 100644 drivers/cpuidle/of_idle_states.h
>>>
>>> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
>>> index 1b96fb9..760ce20 100644
>>> --- a/drivers/cpuidle/Kconfig
>>> +++ b/drivers/cpuidle/Kconfig
>>> @@ -30,6 +30,15 @@ config CPU_IDLE_GOV_MENU
>>>         bool "Menu governor (for tickless system)"
>>>         default y
>>>
>>> +config OF_IDLE_STATES
>>
>> One question here.
>>
>> Do you want this to be generally useful or is it just ARM-specific?
> 
> The first series was targeting ARM64, then I noticed that it might be
> used for ARM too (Daniel is working on that). Actually, I discovered
> that Power and MIPS can reuse at least the code that initializes the
> states data too, but I have to point out three things:
> 
> 1) state enter function method: in my bindings it is common for all
>    idle states, need to check if it applies to Power and MIPS too.

On PowerPC, we have a state enter function for each idle state. It will
not be too difficult to consolidate them into one, but that is not on
the cards right now.

> 2) CPUIDLE_FLAG_TIMER_STOP and how to set it. It is non-trivial to
>    add code that detects what idle states lose the tick device context.
>    At the moment I am adding the flag by default to all idle states
>    apart from standbywfi on ARM, but that can be optimised. Unless we
>    resort to power domains (but that's not trivial), we can add a flag
>    to the idle states in DT (ie local-timer-stop or suchlike) to support
>    that. I think that it will be frowned upon but it is worth trying, would
>    like to know what other people think about this.

On PowerPC we have a bit in flag property of the idle state device node,
which determines if timers will stop. Yes, maybe we can fix it at a
specific bit but it may be messy.

> 3) idle states bindings should be reviewed, I expect them to be valid
>    on other architectures too, but I need acknowledgments.

The major difference as I see it is the idle state bindings. In your
patch there is a device node for each idle state. On PowerPC however,
currently we have a single node with the property values of this node
determining the idle states' name, desc etc..

Besides this, the names of the device tree nodes for idle states could
be arch specific to meet some hierarchical requirements in the device
tree. This would make it difficult for this driver to parse the idle
states based on a generic idle state node name.
> 
> I think this series is not far from being ready to be upstreamed, I
> would be certainly happy if it can be reused for other archs too so
> just let me know.

On PowerPC there are a couple of other sanity checks that we ought to do
before initializing the driver.

So IMO, although we can press out the above mentioned differences in one
way or the other to make way for a generic idle driver which reads from
the device tree, I am not in favour of it since it has to concern itself
with quite a bit of arch-specific stuff. This would anyway make it less
and less of a generic idle driver. So its best to push this patch to be
ARM specific.

Regards
Preeti U Murthy
> 
> Thanks !
> Lorenzo
>