[PATCHv4 4/5] of/mtd/nand: add generic binding and helper for NAND_BBT_NO_OOB_BBM
Lothar Waßmann
LW at KARO-electronics.de
Thu Jun 12 06:20:44 PDT 2014
add a boolean property 'nand-no-oob-bbm' and helper function to be
able to set the NAND_BBT_NO_OOB_BBM flag in DT capable NAND drivers
and use it for i.MX and MXS nand drivers.
Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
Documentation/devicetree/bindings/mtd/nand.txt | 1 +
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 3 +++
drivers/mtd/nand/mxc_nand.c | 2 ++
drivers/of/of_mtd.c | 12 ++++++++++++
include/linux/of_mtd.h | 6 ++++++
5 files changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index b53f92e..e46bfbe 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -5,6 +5,7 @@
"soft_bch".
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
+- nand-no-oob-bbm: boolean to disable writing bad block markers to flash
- nand-ecc-strength: integer representing the number of bits to correct
per ECC step.
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b..37537b4 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1724,6 +1724,9 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+ if (of_get_nand_no_oob_bbm(this->dev->of_node))
+ chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
+
if (of_property_read_bool(this->dev->of_node,
"fsl,no-blockmark-swap"))
this->swap_block_mark = false;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index dba262b..bb54a2a 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1496,6 +1496,8 @@ static int mxcnd_probe(struct platform_device *pdev)
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
this->bbt_options |= NAND_BBT_USE_FLASH;
+ if (of_get_nand_no_oob_bbm(pdev->dev.of_node))
+ this->bbt_options |= NAND_BBT_NO_OOB_BBM;
}
init_completion(&host->op_completion);
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
index b7361ed..d947acc 100644
--- a/drivers/of/of_mtd.c
+++ b/drivers/of/of_mtd.c
@@ -117,3 +117,15 @@ bool of_get_nand_on_flash_bbt(struct device_node *np)
return of_property_read_bool(np, "nand-on-flash-bbt");
}
EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);
+
+/**
+ * of_get_nand_no_oob_bbm - Get nand no oob bbm for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * return true if present, false otherwise
+ */
+bool of_get_nand_no_oob_bbm(struct device_node *np)
+{
+ return of_property_read_bool(np, "nand-no-oob-bbm");
+}
+EXPORT_SYMBOL_GPL(of_get_nand_no_oob_bbm);
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
index e266caa..6ece1a9 100644
--- a/include/linux/of_mtd.h
+++ b/include/linux/of_mtd.h
@@ -17,6 +17,7 @@ int of_get_nand_ecc_step_size(struct device_node *np);
int of_get_nand_ecc_strength(struct device_node *np);
int of_get_nand_bus_width(struct device_node *np);
bool of_get_nand_on_flash_bbt(struct device_node *np);
+bool of_get_nand_no_oob_bbm(struct device_node *np);
#else /* CONFIG_OF_MTD */
@@ -45,6 +46,11 @@ static inline bool of_get_nand_on_flash_bbt(struct device_node *np)
return false;
}
+static inline bool of_get_nand_no_oob_bbm(struct device_node *np)
+{
+ return false;
+}
+
#endif /* CONFIG_OF_MTD */
#endif /* __LINUX_OF_MTD_H */
--
1.7.10.4
More information about the linux-arm-kernel
mailing list