[PATCH V2 04/19] irqchip: crossbar: Initialise the crossbar with a safe value
Sricharan R
r.sricharan at ti.com
Thu Jun 12 04:53:12 PDT 2014
From: Nishanth Menon <nm at ti.com>
Since crossbar is s/w configurable, the initial settings of the
crossbar cannot be assumed to be sane. This implies that:
a) On initialization all un-reserved crossbars must be initialized to
a known 'safe' value.
b) When unmapping the interrupt, the safe value must be written to
ensure that the crossbar mapping matches with interrupt controller
usage.
So provide a safe value in the compatible data to map if
'0' is not safe for the platform and use it during init and unmap
Signed-off-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Sricharan R <r.sricharan at ti.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
drivers/irqchip/irq-crossbar.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 847f6e3..287d3ce 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -44,6 +44,7 @@ struct crossbar_device {
struct crossbar_data {
const uint *irqs_unused;
const uint size;
+ const uint safe_map;
};
static struct crossbar_device *cb;
@@ -134,7 +135,7 @@ const struct irq_domain_ops routable_irq_domain_ops = {
static int __init crossbar_of_init(struct device_node *node,
const struct crossbar_data *data)
{
- int i, size, max, reserved = 0, entry;
+ int i, size, max, reserved = 0, entry, safe_map;
const __be32 *irqsr;
const int *irqsk = NULL;
@@ -212,6 +213,7 @@ static int __init crossbar_of_init(struct device_node *node,
if (data) {
irqsk = data->irqs_unused;
size = data->size;
+ safe_map = data->safe_map;
for (i = 0; i < size; i++) {
entry = irqsk[i];
@@ -222,6 +224,14 @@ static int __init crossbar_of_init(struct device_node *node,
}
cb->irq_map[entry] = IRQ_SKIP;
}
+
+ for (i = 0; i < max; i++) {
+ if (cb->irq_map[i] == IRQ_RESERVED ||
+ cb->irq_map[i] == IRQ_SKIP)
+ continue;
+
+ cb->write(i, safe_map);
+ }
}
register_routable_domain_ops(&routable_irq_domain_ops);
@@ -241,7 +251,7 @@ err1:
/* irq number 10 cannot be used because of hw bug */
int dra_irqs_unused[] = { 10 };
struct crossbar_data cb_dra_data = { dra_irqs_unused,
- ARRAY_SIZE(dra_irqs_unused) };
+ ARRAY_SIZE(dra_irqs_unused), 0 };
static const struct of_device_id crossbar_match[] __initconst = {
{ .compatible = "ti,irq-crossbar", .data = &cb_dra_data },
--
1.7.9.5
More information about the linux-arm-kernel
mailing list