[PATCH v7 4/4] arm: dirty page logging 2nd stage page fault handling support

[Mario Smarduch]

On 06/10/2014 11:58 PM, Christoffer Dall wrote:
> On Tue, Jun 10, 2014 at 11:23:17AM -0700, Mario Smarduch wrote:
>> On 06/08/2014 05:05 AM, Christoffer Dall wrote:
>>> On Tue, Jun 03, 2014 at 04:19:27PM -0700, Mario Smarduch wrote:
>>>> This patch adds support for handling 2nd stage page faults during migration,
>>>> it disables faulting in huge pages, and disolves huge pages to page tables.
>>>
>>> s/disolves/dissolves/g
>> Will do.
>>>
>>>> In case migration is canceled huge pages will be used again.
>>>>
>>>> Signed-off-by: Mario Smarduch <m.smarduch at samsung.com>
>>>> ---
>>>>  arch/arm/kvm/mmu.c |   36 ++++++++++++++++++++++++++++++++++--
>>>>  1 file changed, 34 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
>>>> index 1c546c9..aca4fbf 100644
>>>> --- a/arch/arm/kvm/mmu.c
>>>> +++ b/arch/arm/kvm/mmu.c
>>>> @@ -966,6 +966,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>>>>  	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
>>>>  	struct vm_area_struct *vma;
>>>>  	pfn_t pfn;
>>>> +	/* Get logging status, if dirty_bitmap is not NULL then logging is on */
>>>> +	bool logging_active = !!memslot->dirty_bitmap;
>>>
>>>>  
>>>>  	write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu));
>>>>  	if (fault_status == FSC_PERM && !write_fault) {
>>>> @@ -1019,10 +1021,16 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>>>>  	spin_lock(&kvm->mmu_lock);
>>>>  	if (mmu_notifier_retry(kvm, mmu_seq))
>>>>  		goto out_unlock;
>>>> -	if (!hugetlb && !force_pte)
>>>> +
>>>> +	/* When logging don't spend cycles to check for huge pages */
>>>
>>> drop the comment: either explain the entire clause (which would be too
>>> long) or don't explain anything.
>>>
>> Ok.
>>>> +	if (!hugetlb && !force_pte && !logging_active)
>>>
>>> instead of having all this, can't you just change 
>>>
>>> if (is_vm_hugetlb_page(vma)) to
>>> if (is_vm_hugetlb_page(vma) && !logging_active)
>>>
>>> then you're also not mucking around with the gfn etc.
>>
>> I didn't want to modify this function too much, but if that's ok that 
>> simplifies things a lot.
>>
> 
> Don't worry about the changes as much as the resulting code.  If
> something requires a lot of refactoring, usually that can be handled by
> splitting up renames, factoring out functions, etc. into multiple
> smaller patches.
> 
>>>
>>>>  		hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
>>>>  
>>>> -	if (hugetlb) {
>>>> +	/*
>>>> +	 * Force all not present/perm faults to PTE handling, address both
>>>> +	 * PMD and PTE faults
>>>> +	 */
>>>
>>> I don't understand this comment?  In which case does this apply?
>>>
>> The cases I see here -
>> - huge page permission fault is forced into page table code while logging
>> - pte permission/not present handled by page table code as before.
> 
> Hmm, the wording doesn't really work for me.  I don't think this comment
> adds anything or is required, when getting this deep into the fault
> handler etc., one better understand what's going on.
> 
> The most suitable place for a comment in this work is probably in
> stage2_set_pte() where you can now detect a kvm_pmd_huge(), when you add
> that, you may want to add a small comment that this only happens when
> logging dirty pages.
> 
>>>> +	if (hugetlb && !logging_active) {
>>>>  		pmd_t new_pmd = pfn_pmd(pfn, PAGE_S2);
>>>>  		new_pmd = pmd_mkhuge(new_pmd);
>>>>  		if (writable) {
>>>> @@ -1034,6 +1042,22 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>>>>  	} else {
>>>>  		pte_t new_pte = pfn_pte(pfn, PAGE_S2);
>>>>  		if (writable) {
>>>> +			/*
>>>> +			 * If pmd is  mapping a huge page then clear it and let
>>>> +			 * stage2_set_pte() create a pte table. At the sametime
>>>> +			 * you write protect the pte (PAGE_S2 pgprot_t).
>>>> +			 */
>>>> +			if (logging_active) {
>>>> +				pmd_t *pmd;
>>>> +				if (hugetlb) {
>>>> +					pfn += pte_index(fault_ipa);
>>>> +					gfn = fault_ipa >> PAGE_SHIFT;
>>>> +					new_pte = pfn_pte(pfn, PAGE_S2);
>>>> +				}
>>>> +				pmd = stage2_get_pmd(kvm, NULL, fault_ipa);
>>>> +				if (pmd && kvm_pmd_huge(*pmd))
>>>> +					clear_pmd_entry(kvm, pmd, fault_ipa);
>>>> +			}
>>>
>>> now instead of all this, you just need to check for kvm_pmd_huge() in
>>> stage2_set_pte() and if that's true, you clear it, and then then install
>>> your new pte.
>>
>> Yes this really simplifies things!
>>
>>>
>>>>  			kvm_set_s2pte_writable(&new_pte);
>>>>  			kvm_set_pfn_dirty(pfn);
>>>>  		}
>>>> @@ -1041,6 +1065,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>>>>  		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false);
>>>>  	}
>>>>  
>>>> +	/*
>>>> +	 * Log the dirty page in dirty_bitmap[], call regardless if logging is
>>>> +	 * disabled or enabled both cases handled safely.
>>>> +	 * TODO: for larger page size mark mulitple dirty page bits for each
>>>> +	 *       4k page.
>>>> +	 */
>>>> +	if (writable)
>>>> +		mark_page_dirty(kvm, gfn);
>>>
>>> what if you just faulted in a page on a read which wasn't present
>>> before but it happens to belong to a writeable memslot, is that page
>>> then dirty? hmmm.
>>>
>> A bug, must also check if it was a write fault not just that we're dealing with
>> a writable region. This one could be pretty bad on performance, not to mention
>> in accurate. It will be interesting to see new test results, glad you caught
>> that.
>>
> ok, please fix.
> 
> Thanks,
> -Christoffer
> 

So I'll start on next iteration, make sure it builds cleanly on all the
architecture. Follow up with Paolo on how to handle the generic
functions. I think arm64 will need some extra work.

- Mario