[PATCH v4 6/6] arm64: boot: dts: update rtsm aemv8 dts with PSCI and idle states

[Lorenzo Pieralisi]

This patch updates the RTSM dts file with PSCI bindings and nodes
describing the AEMv8 model idle states parameters.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
---
 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 44 +++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
index d79de9c..4051ffb 100644
--- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
@@ -27,37 +27,65 @@
 		serial3 = &v2m_serial3;
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-method-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-method-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		cpu at 0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 	};
 
-- 
1.8.4