[PATCH 1/2] ARM: tegra: Add device tree nodes for flow controller
Thierry Reding
thierry.reding at gmail.com
Wed Jun 11 04:58:10 PDT 2014
From: Thierry Reding <treding at nvidia.com>
These nodes are required so that the flow controller driver can obtain
the I/O memory region from device tree rather than hard-coding it.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
arch/arm/boot/dts/tegra114.dtsi | 5 +++++
arch/arm/boot/dts/tegra124.dtsi | 5 +++++
arch/arm/boot/dts/tegra20.dtsi | 5 +++++
arch/arm/boot/dts/tegra30.dtsi | 5 +++++
4 files changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 90982679c161..1953113598b2 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -161,6 +161,11 @@
#reset-cells = <1>;
};
+ flow-controller at 60007000 {
+ compatible = "nvidia,tegra114-flowctrl";
+ reg = <0x60007000 0x1000>;
+ };
+
apbdma: dma at 6000a000 {
compatible = "nvidia,tegra114-apbdma";
reg = <0x6000a000 0x1400>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 057340b980dd..0f3c869a1673 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -205,6 +205,11 @@
#reset-cells = <1>;
};
+ flow-controller at 0,60007000 {
+ compatible = "nvidia,tegra124-flowctrl";
+ reg = <0x0 0x60007000 0x0 0x1000>;
+ };
+
gpio: gpio at 0,6000d000 {
compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
reg = <0x0 0x6000d000 0x0 0x1000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 81815416e6d3..e47ae7472e7a 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -201,6 +201,11 @@
#reset-cells = <1>;
};
+ flow-controller at 60007000 {
+ compatible = "nvidia,tegra20-flowctrl";
+ reg = <0x60007000 0x1000>;
+ };
+
apbdma: dma at 6000a000 {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index e88e477bfb2c..d07baa3f840f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -282,6 +282,11 @@
#reset-cells = <1>;
};
+ flow-controller at 60007000 {
+ compatible = "nvidia,tegra30-flowctrl";
+ reg = <0x60007000 0x1000>;
+ };
+
apbdma: dma at 6000a000 {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
--
1.9.2
More information about the linux-arm-kernel
mailing list