[PATCH 2/2] ARM: use menuconfig for sub-arch menus
Rob Herring
robherring2 at gmail.com
Tue Jun 10 07:06:10 PDT 2014
From: Rob Herring <robh at kernel.org>
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.
Signed-off-by: Rob Herring <robh at kernel.org>
---
arch/arm/mach-bcm/Kconfig | 7 +++----
arch/arm/mach-berlin/Kconfig | 6 +-----
arch/arm/mach-cns3xxx/Kconfig | 7 +++----
arch/arm/mach-exynos/Kconfig | 6 +-----
arch/arm/mach-imx/Kconfig | 7 +++----
arch/arm/mach-moxart/Kconfig | 2 +-
arch/arm/mach-mvebu/Kconfig | 6 +-----
arch/arm/mach-nomadik/Kconfig | 4 +---
arch/arm/mach-omap2/Kconfig | 9 ++++++---
arch/arm/mach-prima2/Kconfig | 6 ++----
arch/arm/mach-qcom/Kconfig | 6 +-----
arch/arm/mach-shmobile/Kconfig | 4 ++--
arch/arm/mach-tegra/Kconfig | 7 +++----
arch/arm/mach-u300/Kconfig | 6 +-----
arch/arm/mach-ux500/Kconfig | 6 +-----
arch/arm/mach-vexpress/Kconfig | 7 +++----
16 files changed, 33 insertions(+), 63 deletions(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9bc6db1..41c8391 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,10 +1,9 @@
-config ARCH_BCM
+menuconfig ARCH_BCM
bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
help
This enables support for Broadcom ARM based SoC chips
-menu "Broadcom SoC Selection"
- depends on ARCH_BCM
+if ARCH_BCM
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
@@ -88,4 +87,4 @@ config ARCH_BCM_5301X
different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-endmenu
+endif
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 101e0f3..2631cfc 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_BERLIN
+menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -9,8 +9,6 @@ config ARCH_BERLIN
if ARCH_BERLIN
-menu "Marvell Berlin SoC variants"
-
config MACH_BERLIN_BG2
bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0
@@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q
select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q
-endmenu
-
endif
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 66838f4..3c22a19 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,12 +1,11 @@
-config ARCH_CNS3XXX
+menuconfig ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select PCI_DOMAINS if PCI
help
Support for Cavium Networks CNS3XXX platform.
-menu "CNS3XXX platform type"
- depends on ARCH_CNS3XXX
+if ARCH_CNS3XXX
config MACH_CNS3420VB
bool "Support for CNS3420 Validation Board"
@@ -17,4 +16,4 @@ config MACH_CNS3420VB
This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-endmenu
+endif
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d58995c9..cf01d95 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,7 +7,7 @@
# Configuration options for the EXYNOS4
-config ARCH_EXYNOS
+menuconfig ARCH_EXYNOS
bool "Samsung EXYNOS" if ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
select ARCH_HAS_CPUFREQ
@@ -30,8 +30,6 @@ config ARCH_EXYNOS
if ARCH_EXYNOS
-menu "SAMSUNG EXYNOS SoCs Support"
-
config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
select ARM_CPU_SUSPEND if PM
@@ -118,8 +116,6 @@ config SOC_EXYNOS5800
default y
depends on SOC_EXYNOS5420
-endmenu
-
config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d42eab..dc9bd25 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MXC
+menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
@@ -13,8 +13,7 @@ config ARCH_MXC
help
Support for Freescale MXC/iMX-based family of processors
-menu "Freescale i.MX support"
- depends on ARCH_MXC
+if ARCH_MXC
config MXC_TZIC
bool
@@ -786,4 +785,4 @@ endif
source "arch/arm/mach-imx/devices/Kconfig"
-endmenu
+endif
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 82a4ba8..f49328c 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MOXART
+menuconfig ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 6090b9e..6b3d40a 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MVEBU
+menuconfig ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
@@ -13,8 +13,6 @@ config ARCH_MVEBU
if ARCH_MVEBU
-menu "Marvell EBU SoC variants"
-
config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
@@ -97,6 +95,4 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-endmenu
-
endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 486d301..3c61096 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_NOMADIK
+menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
@@ -15,7 +15,6 @@ config ARCH_NOMADIK
Support for the Nomadik platform by ST-Ericsson
if ARCH_NOMADIK
-menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
@@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK
select I2C_ALGOBIT
select I2C_NOMADIK
-endmenu
endif
config NOMADIK_8815
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0ba4826..94011aa 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,5 +1,7 @@
-config ARCH_OMAP
- bool
+menuconfig ARCH_OMAP
+ bool "TI OMAP/AM/DRA Based" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
+
+if ARCH_OMAP
config ARCH_OMAP2
bool "TI OMAP2"
@@ -82,7 +84,6 @@ config ARCH_OMAP2PLUS
select ARCH_HAS_BANDGAP
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
@@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688
endmenu
endif
+
+endif
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index e4e505f..042f693 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_SIRF
+menuconfig ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
@@ -11,7 +11,7 @@ config ARCH_SIRF
if ARCH_SIRF
-menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
+comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
@@ -37,8 +37,6 @@ config ARCH_MARCO
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
-endmenu
-
config SIRF_IRQ
bool
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fd2b99d..ee5697b 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_QCOM
+menuconfig ARCH_QCOM
bool "Qualcomm Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -11,8 +11,6 @@ config ARCH_QCOM
if ARCH_QCOM
-menu "Qualcomm SoC Selection"
-
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select CLKSRC_QCOM
@@ -25,8 +23,6 @@ config ARCH_MSM8974
bool "Enable support for MSM8974"
select HAVE_ARM_ARCH_TIMER
-endmenu
-
config QCOM_SCM
bool
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index dbd954e..0e7f6fa 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
config ARCH_SHMOBILE
bool
-config ARCH_SHMOBILE_MULTI
+menuconfig ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
@@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI
if ARCH_SHMOBILE_MULTI
-comment "Renesas ARM SoCs System Type"
+#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index e16999e..87bd2b2 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_TEGRA
+menuconfig ARCH_TEGRA
bool "NVIDIA Tegra" if ARCH_MULTI_V7
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
@@ -16,8 +16,7 @@ config ARCH_TEGRA
help
This enables support for NVIDIA Tegra based systems.
-menu "NVIDIA Tegra options"
- depends on ARCH_TEGRA
+if ARCH_TEGRA
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
@@ -69,4 +68,4 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
performance parameters(priority, prefech size).
-endmenu
+endif
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index e3a96d7..bc51a71 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_U300
+menuconfig ARCH_U300
bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
depends on MMU
select ARCH_REQUIRE_GPIOLIB
@@ -16,8 +16,6 @@ config ARCH_U300
if ARCH_U300
-menu "ST-Ericsson AB U300/U335 Platform"
-
config MACH_U300
depends on ARCH_U300
bool "U300"
@@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-endmenu
-
endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b41a42d..11f3837 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_U8500
+menuconfig ARCH_U8500
bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
depends on MMU
select AB8500_CORE
@@ -34,8 +34,6 @@ config UX500_SOC_DB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
-menu "Ux500 target platform (boards)"
-
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select I2C
@@ -68,8 +66,6 @@ config UX500_AUTO_PLATFORM
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
-endmenu
-
config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug"
default 2
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 90249cf..e7fd09c 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_VEXPRESS
+menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
@@ -37,8 +37,7 @@ config ARCH_VEXPRESS
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
+if ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds"
@@ -83,4 +82,4 @@ config ARCH_VEXPRESS_TC2_PM
Support for CPU and cluster power management on Versatile Express
with a TC2 (A15x2 A7x3) big.LITTLE core tile.
-endmenu
+endif
--
1.9.1
More information about the linux-arm-kernel
mailing list