[PATCH v2] ARM: shmobile: koelsch: Add support HSCIF1

[Simon Horman]

On Tue, Jun 10, 2014 at 01:14:27PM +0900, Magnus Damm wrote:
> Hi Iwamatsu-san,
> 
> On Tue, Jun 10, 2014 at 11:34 AM, Nobuhiro Iwamatsu
> <nobuhiro.iwamatsu.yj at renesas.com> wrote:
> > Koelsch can use HSCIF1 insetead of SCIF1 as serial port. But if we want to
> > use, we will need to disable the GPIO key and remodeling of the board.
> > Therefore status of hscif1 does not set the "okay".
> >
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
> > ---
> >  V2: Remove hscif1_clk from renesas,groups. This pin does not use.
> 
> Thanks for updating the patch. This looks fine to me.
> 
> Acked-by: Magnus Damm <damm+renesas at opensource.se>

Thanks, I will queue this up.