[PATCH 0/9] ARM: Berlin: USB support

[Peter Chen]

On Thu, Jun 05, 2014 at 05:48:37PM +0200, Antoine Ténart wrote:
> This series adds the support for the Marvell Berlin USB controllers,
> the USB PHYs and also adds a reset controller.
> 
> The reset controller is used by the USB PHY driver and shares the
> existing chip controller node with the clocks and one pin controller.
> 
> The Marvell Berlin USB controllers are host only on the BG2Q and are
> compatible with USB ChipIdea. We here add a glue to use the available
> common functions for this kind of controllers. A USB PHY driver is also
> added to control the PHY.
> 
> Antoine Ténart (9):
>   reset: add the Berlin reset controller driver
>   ARM: Berlin: select the reset controller
>   ARM: dts: berlin: add a required reset property in the chip controller
>     node
>   usb: phy: add the Berlin USB PHY driver
>   Documentation: bindings: add doc for the Berlin USB PHY
>   usb: chipidea: add Berlin USB support
>   Documentation: bindings: add doc for the Berlin ChipIdea USB driver
>   ARM: dts: berlin: add BG2Q nodes for USB support
>   ARM: dts: Berlin: enable USB on the BG2Q DMP
> 
>  .../devicetree/bindings/usb/berlin-usbphy.txt      |  18 ++
>  .../devicetree/bindings/usb/ci-hdrc-berlin.txt     |  18 ++
>  arch/arm/boot/dts/berlin2.dtsi                     |   1 +
>  arch/arm/boot/dts/berlin2cd.dtsi                   |   1 +
>  arch/arm/boot/dts/berlin2q-marvell-dmp.dts         |  20 ++
>  arch/arm/boot/dts/berlin2q.dtsi                    |  52 +++++
>  arch/arm/mach-berlin/Kconfig                       |   2 +
>  drivers/reset/Makefile                             |   1 +
>  drivers/reset/reset-berlin.c                       | 113 +++++++++++
>  drivers/usb/chipidea/Makefile                      |   1 +
>  drivers/usb/chipidea/ci_hdrc_berlin.c              | 108 ++++++++++
>  drivers/usb/phy/Kconfig                            |   9 +
>  drivers/usb/phy/Makefile                           |   1 +
>  drivers/usb/phy/phy-berlin-usb.c                   | 223 +++++++++++++++++++++
>  14 files changed, 568 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/berlin-usbphy.txt
>  create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt
>  create mode 100644 drivers/reset/reset-berlin.c
>  create mode 100644 drivers/usb/chipidea/ci_hdrc_berlin.c
>  create mode 100644 drivers/usb/phy/phy-berlin-usb.c
> 
> -- 
> 1.9.1
> 

I am fine with 6/9, 7/9, will queue them if no other objections.

-- 

Best Regards,
Peter Chen