[PATCH] PM / OPP: Remove ARCH_HAS_OPP

Rob Herring robh at kernel.org
Fri Jun 6 06:45:41 PDT 2014


On Fri, Jun 6, 2014 at 5:36 AM, Mark Brown <broonie at kernel.org> wrote:
> From: Mark Brown <broonie at linaro.org>
>
> Since the OPP layer is a kernel library which has been converted to be
> directly selectable by its callers rather than user selectable and
> requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
> has become redundant and can be removed. Do so.
>
> Signed-off-by: Mark Brown <broonie at linaro.org>

Acked-by: Rob Herring <robh at kernel.org>

> ---
>  Documentation/power/opp.txt    | 3 ---
>  arch/arm/mach-exynos/Kconfig   | 1 -
>  arch/arm/mach-highbank/Kconfig | 1 -
>  arch/arm/mach-imx/Kconfig      | 1 -
>  arch/arm/mach-omap2/Kconfig    | 1 -
>  arch/arm/mach-shmobile/Kconfig | 2 --
>  arch/arm/mach-vexpress/Kconfig | 1 -
>  arch/arm/mach-zynq/Kconfig     | 1 -
>  drivers/devfreq/Kconfig        | 1 -
>  kernel/power/Kconfig           | 3 ---
>  10 files changed, 15 deletions(-)
>
> diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
> index a9adad8..c6279c2 100644
> --- a/Documentation/power/opp.txt
> +++ b/Documentation/power/opp.txt
> @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows:
>  SoC framework  -> modifies on required cases certain OPPs      -> OPP layer
>                 -> queries to search/retrieve information       ->
>
> -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
> -to make the OPP layer available.
> -
>  OPP layer expects each domain to be represented by a unique device pointer. SoC
>  framework registers a set of initial OPPs per device with the OPP layer. This
>  list is expected to be an optimally small number typically around 5 per device.
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index d58995c9..3f78c45 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -103,7 +103,6 @@ config SOC_EXYNOS5440
>         default y
>         depends on ARCH_EXYNOS5
>         select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
> -       select ARCH_HAS_OPP
>         select HAVE_ARM_ARCH_TIMER
>         select AUTO_ZRELADDR
>         select MIGHT_HAVE_PCI
> diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
> index 830b76e..bef970f 100644
> --- a/arch/arm/mach-highbank/Kconfig
> +++ b/arch/arm/mach-highbank/Kconfig
> @@ -3,7 +3,6 @@ config ARCH_HIGHBANK
>         select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
>         select ARCH_HAS_CPUFREQ
>         select ARCH_HAS_HOLES_MEMORYMODEL
> -       select ARCH_HAS_OPP
>         select ARCH_SUPPORTS_BIG_ENDIAN
>         select ARM_AMBA
>         select ARM_ERRATA_764369 if SMP
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 4cce93d..95690e4 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -1,7 +1,6 @@
>  config ARCH_MXC
>         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
>         select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select ARCH_REQUIRE_GPIOLIB
>         select ARM_CPU_SUSPEND if PM
>         select CLKSRC_MMIO
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 0ba4826..524b027 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -12,7 +12,6 @@ config ARCH_OMAP3
>         bool "TI OMAP3"
>         depends on ARCH_MULTI_V7
>         select ARCH_OMAP2PLUS
> -       select ARCH_HAS_OPP
>         select ARM_CPU_SUSPEND if PM
>         select OMAP_INTERCONNECT
>         select PM_OPP if PM
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index dbd954e..b51d142 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -86,7 +86,6 @@ config ARCH_R8A73A4
>         select SH_CLK_CPG
>         select RENESAS_IRQC
>         select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select SYS_SUPPORTS_SH_CMT
>         select SYS_SUPPORTS_SH_TMU
>
> @@ -265,7 +264,6 @@ config MACH_KZM9G
>         bool "KZM-A9-GT board"
>         depends on ARCH_SH73A0
>         select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select ARCH_REQUIRE_GPIOLIB
>         select REGULATOR_FIXED_VOLTAGE if REGULATOR
>         select SND_SOC_AK4642 if SND_SIMPLE_CARD
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index 90249cf..71629fe 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -66,7 +66,6 @@ config ARCH_VEXPRESS_DCSCB
>  config ARCH_VEXPRESS_SPC
>         bool "Versatile Express Serial Power Controller (SPC)"
>         select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select PM_OPP
>         help
>           The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> index 573e0db..bc485f2 100644
> --- a/arch/arm/mach-zynq/Kconfig
> +++ b/arch/arm/mach-zynq/Kconfig
> @@ -1,7 +1,6 @@
>  config ARCH_ZYNQ
>         bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
>         select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select ARCH_SUPPORTS_BIG_ENDIAN
>         select ARM_AMBA
>         select ARM_GIC
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 49e74c1..3dced0a 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -68,7 +68,6 @@ comment "DEVFREQ Drivers"
>  config ARM_EXYNOS4_BUS_DEVFREQ
>         bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
>         depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
> -       select ARCH_HAS_OPP
>         select DEVFREQ_GOV_SIMPLE_ONDEMAND
>         select PM_OPP
>         help
> diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
> index 9a83d78..e4e4121 100644
> --- a/kernel/power/Kconfig
> +++ b/kernel/power/Kconfig
> @@ -253,9 +253,6 @@ config APM_EMULATION
>           anything, try disabling/enabling this option (or disabling/enabling
>           APM in your BIOS).
>
> -config ARCH_HAS_OPP
> -       bool
> -
>  config PM_OPP
>         bool
>         ---help---
> --
> 2.0.0
>



More information about the linux-arm-kernel mailing list