[PATCH v3] clk: exynos5420: Remove aclk66_peric from the clock tree description
Mike Turquette
mturquette at linaro.org
Thu Jun 5 17:03:24 PDT 2014
Quoting Doug Anderson (2014-06-05 13:35:14)
> The "aclk66_peric" clock is a gate clock with a whole bunch of gates
> underneath it. This big gate isn't very useful to include in our
> clock tree. If any of the children need to be turned on then the big
> gate will need to be on anyway. ...and there are plenty of other "big
> gates" that aren't described in our clock tree, some of which shut off
> collections of clocks that have no relationship in the hierarchy so
> are hard to model.
I think this is a common problem. On OMAP we have something similar to
this called "clock domains" or "clkdm" and it has been historically
handled outside of the Linux clock framework[1]. There is a relationship
to the clock framework of course and in the future it might be
worthwhile to see if there is a generic way to handle this stuff.
>
> "aclk66_peric" is causing earlyprintk problems since it gets disabled
> as part of the boot process, so let's just remove it.
>
> Strangely (and for no good reason) this clock is exported as part of
> the common clock bindings. Remove it since there are no in-kernel
> device trees using it and no reason anyone out of tree should refer to
> it either.
So Linux has no control over the big gate now, correct? You are
dependent on the bootloader to ungate this thing?
Regards,
Mike
[1] http://deferred.io/images/clkdm.png
>
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
> Changes in v3:
> - Now just remove aclk66_peric from the tree as suggested by Tomasz.
>
> Changes in v2:
> - Use GATE_A and clk_get(). Save the clock for putting later.
> - Return 0 from exynos5420_clk_late_init().
>
> drivers/clk/samsung/clk-exynos5420.c | 85 ++++++++++++++++++++++------------
> include/dt-bindings/clock/exynos5420.h | 1 -
> 2 files changed, 55 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 9d7d7ee..61eccf0 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
> GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
> GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
> GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
> - GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
> - GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
> GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
> GATE_BUS_TOP, 13, 0, 0),
> GATE(0, "aclk166", "mout_user_aclk166",
> @@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
> SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
>
> /* PERIC Block */
> - GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
> - GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
> - GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
> - GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
> - GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
> - GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
> - GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
> - GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
> - GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
> - GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
> - GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
> - GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
> - GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
> - GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
> - GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
> - GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
> - GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
> - GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
> - GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
> - GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
> - GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
> - GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
> - GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
> - GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
> - GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
> - GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
> -
> - GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
> + GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 0, 0, 0),
> + GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 1, 0, 0),
> + GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 2, 0, 0),
> + GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 3, 0, 0),
> + GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 6, 0, 0),
> + GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 7, 0, 0),
> + GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 8, 0, 0),
> + GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 9, 0, 0),
> + GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 10, 0, 0),
> + GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 11, 0, 0),
> + GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 12, 0, 0),
> + GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 13, 0, 0),
> + GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 14, 0, 0),
> + GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 15, 0, 0),
> + GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 16, 0, 0),
> + GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 17, 0, 0),
> + GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 18, 0, 0),
> + GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 20, 0, 0),
> + GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 21, 0, 0),
> + GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 22, 0, 0),
> + GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 23, 0, 0),
> + GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 24, 0, 0),
> + GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 26, 0, 0),
> + GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 28, 0, 0),
> + GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 30, 0, 0),
> + GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric",
> + GATE_IP_PERIC, 31, 0, 0),
> +
> + GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric",
> + GATE_BUS_PERIC, 22, 0, 0),
>
> /* PERIS Block */
> GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
> diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
> index 97dcb89..14e1c8f 100644
> --- a/include/dt-bindings/clock/exynos5420.h
> +++ b/include/dt-bindings/clock/exynos5420.h
> @@ -63,7 +63,6 @@
> #define CLK_SCLK_MPHY_IXTAL24 161
>
> /* gate clocks */
> -#define CLK_ACLK66_PERIC 256
> #define CLK_UART0 257
> #define CLK_UART1 258
> #define CLK_UART2 259
> --
> 2.0.0.526.g5318336
>
More information about the linux-arm-kernel
mailing list