[PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK

[Dirk Behme]

On 04.06.2014 19:29, Ranjani.Vaidyanathan at freescale.com wrote:
> Hi Dirk,
>
> Responses below.
>
> Thanks,
> Ranjani
>
> -----Original Message-----
> From: Dirk Behme [mailto:dirk.behme at gmail.com]
> Sent: Wednesday, June 04, 2014 11:37 AM
> To: Vaidyanathan Ranjani-RA5478; Estevam Fabio-R49496
> Cc: Fabio Estevam; Guo Shawn-R65073; christian.gmeiner at gmail.com; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK
>
> On 09.04.2014 13:55, Fabio Estevam wrote:
>> From: Fabio Estevam <fabio.estevam at freescale.com>
>>
>> Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
>> tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
>> enter the ldb_di_ipu_div divider. If the divider gets locked up, no
>> ldb_di[x]_clk is generated, and the LVDS display will hang when the
>> ipu_di_clk is sourced from ldb_di_clk.
>>
>> To fix the problem, both the new and current parent of the ldb_di_clk
>> should be disabled before the switch. This patch ensures that correct
>> steps are followed when ldb_di_clk parent is switched in the beginning of boot.
>>
>> Signed-off-by: Ranjani Vaidyanathan
>> <Ranjani.Vaidyanathan at freescale.com>
>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>> ---
>>    arch/arm/mach-imx/clk-imx6q.c | 125 ++++++++++++++++++++++++++++++++++++++++--
>>    1 file changed, 121 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/clk-imx6q.c
>> b/arch/arm/mach-imx/clk-imx6q.c index 20ad0d1..3ee45f4 100644
>> --- a/arch/arm/mach-imx/clk-imx6q.c
>> +++ b/arch/arm/mach-imx/clk-imx6q.c
> ....
>> +static void disable_anatop_clocks(void __iomem *anatop_base) {
>> +	unsigned int reg;
>> +
>> +	/* Make sure PFDs are disabled at boot. */
>> +	reg = readl_relaxed(anatop_base + 0x100);
>> +	/* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
>> +	if (cpu_is_imx6dl())
>> +		reg |= 0x80008080;
>> +	else
>> +		reg |= 0x80808080;
>
> There are two issues with this code section:
>
> 1) You want to know here if pll2_pfd2_396M is used as MMDC clock. This is independent of IMX6DL. Even a Quad/Dual could use pll2_pfd2_396M as MMDC clock. You better should check what you are really looking for:
>
> if (MMDC clock == pll2_pfd2_396M)
> ...
> [RV] Yes, you are perfectly correct. We need to check MMDC parent clock.

Just an additional question:

Do we really need that check here? Why wouldn't it be sufficent to just do

reg |= 0x00008080;

?

Independent if pll2_pfd2_396M is used as MMDC clock or not? Or if we 
are on a DualLite or Quad/Dual?

Best regards

Dirk