[PATCH v2 0/5] ARM: Berlin: SMP support

[Antoine Ténart]

This series adds the SMP support for Marvell Berlin BG2 and BG2Q.

This implementation takes advantage of the reset exception register and
the software reset address register to make the CPUs execute the Berlin
secondary startup when being reset. This has the advantage of not using
the pen lock mechanism.

Patch 3 depends on Alex Elder effort to properly document CPU enable
methods: https://patchwork.kernel.org/patch/4138211/

Changes since v1:
	- added a proper enable-method documentation
	- s/reseted/reset/ and s/register/vector/
	- removed unneeded 'select SMP'

Antoine Ténart (5):
  ARM: berlin: add SMP support
  Documentation: bindings: add the Berlin CPU control doc
  Documentation: bindings: add the marvell,berlin-smp CPU enable method
  ARM: dts: berlin: add SMP related nodes and properties for BG2
  ARM: dts: berlin: add SMP related nodes and properties for BG2Q

 .../arm/cpu-enable-method/marvell,berlin-smp       | 41 +++++++++
 .../devicetree/bindings/arm/marvell,berlin.txt     | 16 ++++
 arch/arm/boot/dts/berlin2.dtsi                     | 11 +++
 arch/arm/boot/dts/berlin2q.dtsi                    | 11 +++
 arch/arm/mach-berlin/Kconfig                       |  3 +
 arch/arm/mach-berlin/Makefile                      |  3 +-
 arch/arm/mach-berlin/headsmp.S                     | 30 +++++++
 arch/arm/mach-berlin/platsmp.c                     | 99 ++++++++++++++++++++++
 8 files changed, 213 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
 create mode 100644 arch/arm/mach-berlin/headsmp.S
 create mode 100644 arch/arm/mach-berlin/platsmp.c

-- 
1.9.1