[PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenC0
It includes 2 c32 type PLL and a 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez at linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau at st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 46b29c4..68c6786 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -255,6 +255,49 @@ static struct clkgen_quadfs_data st_fs660c32_F_416 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_C_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2f0, 0x1, 0),
+		    CLKGEN_FIELD(0x2f0, 0x1, 1),
+		    CLKGEN_FIELD(0x2f0, 0x1, 2),
+		    CLKGEN_FIELD(0x2f0, 0x1, 3) },
+	.npda	= CLKGEN_FIELD(0x2f0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2f0, 0x1, 8),
+		    CLKGEN_FIELD(0x2f0, 0x1, 9),
+		    CLKGEN_FIELD(0x2f0, 0x1, 10),
+		    CLKGEN_FIELD(0x2f0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x304, 0x1, 24),
+		    CLKGEN_FIELD(0x308, 0x1, 24),
+		    CLKGEN_FIELD(0x30c, 0x1, 24),
+		    CLKGEN_FIELD(0x310, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x304, 0x1f, 15),
+		    CLKGEN_FIELD(0x308, 0x1f, 15),
+		    CLKGEN_FIELD(0x30c, 0x1f, 15),
+		    CLKGEN_FIELD(0x310, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2fc, 0x1, 0),
+		    CLKGEN_FIELD(0x2fc, 0x1, 1),
+		    CLKGEN_FIELD(0x2fc, 0x1, 2),
+		    CLKGEN_FIELD(0x2fc, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2f4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x304, 0x7fff, 0),
+		    CLKGEN_FIELD(0x308, 0x7fff, 0),
+		    CLKGEN_FIELD(0x30c, 0x7fff, 0),
+		    CLKGEN_FIELD(0x310, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x304, 0xf, 20),
+		    CLKGEN_FIELD(0x308, 0xf, 20),
+		    CLKGEN_FIELD(0x30c, 0xf, 20),
+		    CLKGEN_FIELD(0x310, 0xf, 20) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -938,6 +981,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih416-quadfs660-F",
 		.data = (void *)&st_fs660c32_F_416
 	},
+	{
+		.compatible = "st,stih407-quadfs660-C",
+		.data = (void *)&st_fs660c32_C_407
+	},
 	{}
 };
 
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 6916cfa..8952566 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -192,6 +192,30 @@ static struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_c0_0 = {
+	/* 407 C0 PLL0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
+static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
+	/* 407 C0 PLL1 */
+	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2c8,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2cc,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2cc,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2dc, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2dc, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -588,6 +612,14 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-a0",
 		.data = &st_pll3200c32_407_a0,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_0",
+		.data = &st_pll3200c32_407_c0_0,
+	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_1",
+		.data = &st_pll3200c32_407_c0_1,
+	},
 	{}
 };
 
-- 
1.9.1