[PATCH 3/5] regulator: axp20x: Update the bindings to use a local parent regulator

[Maxime Ripard]

On Wed, May 28, 2014 at 07:50:51PM +0100, Mark Brown wrote:
> On Wed, May 28, 2014 at 07:11:07PM +0200, Maxime Ripard wrote:
> 
> >  		axp_vcore_reg: dcdc2 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_ddr_reg: dcdc3 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_rtc_reg: ldo1 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_analog_reg: ldo2 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_pll_reg: ldo3 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_hdmi_reg: ldo4 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> >  		axp_mic_reg: ldo5 {
> > +			vin-supply = <&axp_ipsout_reg>;
> 
> This is saying that every single regulator on the device is powered by a
> (presumably) single input called "vin".  This would certainly be an
> unusual package design...  As ever the name of the supply should follow
> the name of the pin on the device.

Not exactly. Each regulator has its own input pin, named
<regulator_name>in in the schematics, with the exception of LDO2 and
LDO4 that share the same pin.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140603/9a0c1b06/attachment-0001.sig>