[PATCH v5 03/10] ARM: dts: Clean up exynos5250-snow
Andreas Färber
afaerber at suse.de
Thu Jul 31 21:54:50 PDT 2014
Use the new style of referencing inherited nodes and use symbolic names.
Reorder one pinctrl node in GPIO order.
Goal is the alignment of all exynos5250 based device trees for comparison.
Suggested-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
v4 -> v5:
* Introduced labels to consistently use new referencing style (Tomasz)
* Use IRQ_TYPE_* constants
* Use some more GPIO_ACTIVE_*
v3 -> v4: Unchanged
v3: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
arch/arm/boot/dts/exynos5250.dtsi | 20 +--
2 files changed, 155 insertions(+), 156 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1c36cd72905f..7680d5e03fb3 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,9 +6,12 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -26,89 +29,19 @@
chosen {
};
- rtc at 101E0000 {
- status = "okay";
- };
-
- pinctrl at 11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl at 13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -129,8 +62,8 @@
i2c-parent = <&{/i2c at 12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -153,7 +86,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -239,19 +172,6 @@
};
};
- i2c at 12CD0000 {
- max98095: codec at 11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
- };
-
- i2s0: i2s at 03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -265,20 +185,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy at 12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb at 12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -286,19 +198,7 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
@@ -306,42 +206,58 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+};
- fimd at 14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
- dp-controller at 145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing at 1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing at 1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
};
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
@@ -350,7 +266,7 @@
max77686 at 09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -500,7 +416,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -547,6 +463,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec at 11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -560,6 +483,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -592,7 +519,7 @@
slot at 0 {
reg = <0>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
};
};
@@ -619,12 +546,80 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -633,4 +628,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 834fb5a5306f..ff1c09607631 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -224,7 +224,7 @@
clock-names = "mfc";
};
- rtc at 101E0000 {
+ rtc: rtc at 101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -238,22 +238,22 @@
clock-names = "tmu_apbif";
};
- serial at 12C00000 {
+ uart0: serial at 12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C10000 {
+ uart1: serial at 12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C20000 {
+ uart2: serial at 12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C30000 {
+ uart3: serial at 12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -570,7 +570,7 @@
#phy-cells = <1>;
};
- usb at 12110000 {
+ ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -585,7 +585,7 @@
};
};
- usb at 12120000 {
+ ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -722,7 +722,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -748,14 +748,14 @@
#phy-cells = <0>;
};
- dp-controller at 145B0000 {
+ dp: dp-controller at 145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd at 14400000 {
+ fimd: fimd at 14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
1.9.3
More information about the linux-arm-kernel
mailing list