[PATCH v4 4/5] ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi
Doug Anderson
dianders at chromium.org
Thu Jul 31 15:49:35 PDT 2014
The EHCI and HSIC device tree nodes were added in the wrong place.
Fix them.
Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---
Changes in v4:
- Based on the proper patch
Changes in v3:
- EHCI and HSIC move new for version 3.
arch/arm/boot/dts/rk3288.dtsi | 41 ++++++++++++++++++++---------------------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9713054..49c99f2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -156,6 +156,17 @@
status = "disabled";
};
+ usb_host0_ehci: usb at ff500000 {
+ compatible = "generic-ehci";
+ reg = <0xff500000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST0>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ /* NOTE: ohci at ff520000 doesn't actually work on hardware */
+
usb_host1: usb at ff540000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -176,6 +187,15 @@
status = "disabled";
};
+ usb_hsic: usb at ff5c0000 {
+ compatible = "generic-ehci";
+ reg = <0xff5c0000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HSIC>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
uart2: serial at ff690000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff690000 0x100>;
@@ -270,27 +290,6 @@
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
-
- usb_host0_ehci: usb at ff500000 {
- compatible = "generic-ehci";
- reg = <0xff500000 0x100>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_USBHOST0>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
- /* NOTE: ohci at ff520000 doesn't actually work on hardware */
-
- usb_hsic: usb at ff5c0000 {
- compatible = "generic-ehci";
- reg = <0xff5c0000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_HSIC>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
gic: interrupt-controller at ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.0.0.526.g5318336
More information about the linux-arm-kernel
mailing list