[REPOST PATCH v3 4/5] ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi

Kever Yang kever.yang at rock-chips.com
Thu Jul 31 14:26:24 PDT 2014


From: Doug Anderson <dianders at chromium.org>

The EHCI and HSIC device tree nodes were added in the wrong place.
Fix them.

Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

Changes in v3:
- EHCI and HSIC move new for version 3.

Changes in v2: None

 arch/arm/boot/dts/rk3288.dtsi |   41 ++++++++++++++++++++---------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index a5607a1..673dee3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -205,6 +205,17 @@
 		status = "disabled";
 	};
 
+	usb_host0_ehci: ehci at ff500000 {
+		compatible = "generic-ehci";
+		reg = <0xff500000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	/* NOTE: ohci at ff520000 doesn't actually work on hardware */
+
 	usb_host1: usb at ff540000 {
 		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
 				"snps,dwc2";
@@ -225,6 +236,15 @@
 		status = "disabled";
 	};
 
+	usb_hsic: ehci at ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0xff5c0000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
 	uart2: serial at ff690000 {
 		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
 		reg = <0xff690000 0x100>;
@@ -319,27 +339,6 @@
 		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
-
-	usb_host0_ehci: ehci at ff500000 {
-		compatible = "generic-ehci";
-		reg = <0xff500000 0x100>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	/* NOTE: ohci at ff520000 doesn't actually work on hardware */
-
-	usb_hsic: ehci at ff5c0000 {
-		compatible = "generic-ehci";
-		reg = <0xff5c0000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
 	gic: interrupt-controller at ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list