[PATCH 1/3] ARM: dts: Turn on USB host vbus on rk3288-evb

[Heiko Stübner]

Am Dienstag, 29. Juli 2014, 16:24:31 schrieb Doug Anderson:
> There is no phy driver that works on the Rockchip board for either USB
> host port yet.  For now just hardcode the vbus signal to be on all the
> time which makes both the dwc2 host and the EHCI port work.
> 
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
>  arch/arm/boot/dts/rk3288-evb.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi
> b/arch/arm/boot/dts/rk3288-evb.dtsi index 749e20d..efd625e 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -35,6 +35,18 @@
>  			debounce-interval = <100>;
>  		};
>  	};
> +
> +	/* This turns on vbus for both host0 (ehci) and host1 (dwc2) */
> +	usb_host_vbus_regulator: usb-host-vbus-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_vbus>;
> +		regulator-name = "usb-host-vbus";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
>  };

It seems I have a slightly outdated schematics pdf for the evb ... and only 
see the OTG vbus pin, on <&gpio0 12>, but am missing the whole host vbus.

Could you think about finding another name for the handle? For example, in my 
incomplete evb-schematics the supply coming from the otg regulator is called 
vcc50_usb and there should be something similar for the host supply, so I'd 
like something like

	vcc50_usbhost: usb-host-vbus-regulator { /* or whatever it gets called */
	...
	};

simply to keep with the supply names defined in the schematics - makes reading 
easier.


Heiko

> 
>  &i2c0 {
> @@ -71,4 +83,10 @@
>  			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
>  		};
>  	};
> +
> +	usb-host {
> +		usb_host_vbus: usb-host-vbus {
> +			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
>  };