[PATCH v4 1/6] rtc: sun6i: Add sun6i RTC driver

Chen-Yu Tsai wens at csie.org
Wed Jul 30 02:33:49 PDT 2014


Hi,

On Wed, Jul 30, 2014 at 4:57 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Hi Chen-Yu,
>
> On Mon, Jul 28, 2014 at 04:20:56PM +0800, Chen-Yu Tsai wrote:
>> This patch introduces the driver for the RTC in the Allwinner A31 and
>> A23 SoCs.
>>
>> Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the
>> RTC in A31/A23 are a separate hardware block, which also contain a few
>> controls for the RTC block hardware (a regulator and RTC block GPIO pin
>> latches), while also having separate interrupts for the alarms.
>>
>> The hardware is different enough to make a different driver for it.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>>  .../devicetree/bindings/rtc/sun6i-rtc.txt          |  17 +
>>  drivers/rtc/Kconfig                                |   7 +
>>  drivers/rtc/Makefile                               |   1 +
>>  drivers/rtc/rtc-sun6i.c                            | 447 +++++++++++++++++++++
>>  4 files changed, 472 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
>>  create mode 100644 drivers/rtc/rtc-sun6i.c
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
>> new file mode 100644
>> index 0000000..b7fb7a8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
>> @@ -0,0 +1,17 @@
>> +* sun6i Real Time Clock
>> +
>> +RTC controller for the Allwinner A31
>> +
>> +Required properties:
>> +- compatible : Should be "allwinner,sun6i-a31-rtc"
>> +- reg                : physical base address of the controller and length of
>> +               memory mapped region.
>> +- interrupts : IRQ line for the RTC alarm 0.
>
> Even if we're using only one interrupt in the code, the hardware has
> two, so it would be great if you could ask for these two in the
> bindings.

Sure. It's just a minor change here and in the example:

- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.

Varka, may I keep your Reviewed-by with the changes?

> Since it also impacts the DT patches I just merged, I dropped them,
> and will merge them as soon as they have the two interrupts listed.

I will send a new version later.

>> +
>> +Example:
>> +
>> +rtc: rtc at 01f00000 {
>> +     compatible = "allwinner,sun6i-a31-rtc";
>> +     reg = <0x01f00000 0x54>;
>> +     interrupts = <0 40 4>;

Change:

        interrupts = <0 40 4>, <0 41 4>;

>> +};

[...]

> It looks nice otherwise.
>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Thanks.

ChenYu



More information about the linux-arm-kernel mailing list