[PATCH v11 0/2] Add support for the Allwinner A31 DMA Controller

[Maxime Ripard]

On Mon, Jul 28, 2014 at 07:48:12PM +0530, Vinod Koul wrote:
> On Mon, Jul 28, 2014 at 12:14:02PM +0200, Maxime Ripard wrote:
> > On Fri, Jul 25, 2014 at 10:12:18PM +0530, Vinod Koul wrote:
> > > On Fri, Jul 25, 2014 at 06:37:46PM +0200, Maxime Ripard wrote:
> > > > > Can you please send follow patches for these:
> > > > > - don't recall if I pointed earlier, but can we use direct conversion for
> > > > >   calculating convert_burst() and convert_buswidth(), latter one at least
> > > > >   seem doable
> > > > 
> > > > Ok. Do you still want the error reporting for the invalid width and
> > > > burst size?
> > > I think for convert_buswidth() we can do away with a switch case and convert
> > > the numbers directly
> > 
> > Well, it's already using a switch. Do you want me to remove completely
> > the function and move the switch where it's used? It's used two times
> > now, so I'd like to avoid duplicating it.
> You can probably remove switch in these function by converting them
> arithmetically..
> 
> > > > > - don't use devm_request_irq(). You have irq enabled and you have killed
> > > > >   tasklet. This is too racy. You need to ensure no irqs can be generated before killing
> > > > >   tasklets.
> > > > 
> > > > Ok, would calling disable_irq before killing the tasklet an option for
> > > > you ? that would allow to keep the devm_request_irq.
> > > disable_irq also does syncronize, so it might work. But then again if the
> > > probe fails after registering irq due to some other reason, and you get into
> > > races with unitialized driver as well.
> > > 
> > > I think it might be easier to amnge by working with plain old request_irq()
> > 
> > Yes, devm_free_irq like Russell suggested seems to both address your
> > concerns, while not having to care about it at probe.
> OK, pls send the fix

Ok, will do tomorrow.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140729/e24cf17c/attachment.sig>