[PATCH 2/6] irqchip: Supply new driver for STi based devices
Lee Jones
lee.jones at linaro.org
Tue Jul 29 07:05:40 PDT 2014
This driver is used to enable System Configuration Register controlled
External, CTI (Core Sight), PMU (Performance Management), and PL310 L2
Cache IRQs prior to use.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/irqchip/Kconfig | 7 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-st.c | 206 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+)
create mode 100644 drivers/irqchip/irq-st.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index bbb746e..7252de9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -91,3 +91,10 @@ config IRQ_CROSSBAR
The primary irqchip invokes the crossbar's callback which inturn allocates
a free irq and configures the IP. Thus the peripheral interrupts are
routed to one of the free irqchip interrupt lines.
+
+config ST_IRQCHIP
+ bool
+ select REGMAP
+ select MFD_SYSCON
+ help
+ Enables SysCfg Controlled IRQs on STi based platforms.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 62a13e5..f859c14 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
+obj-$(CONFIG_ST_IRQCHIP) += irq-st.o
diff --git a/drivers/irqchip/irq-st.c b/drivers/irqchip/irq-st.c
new file mode 100644
index 0000000..f31126f
--- /dev/null
+++ b/drivers/irqchip/irq-st.c
@@ -0,0 +1,206 @@
+/*
+ * drivers/irqchip/irq-st.c
+ *
+ * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones at linaro.org>
+ *
+ * This is a re-write of Christophe Kerello's PMU driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/irq-st.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define STIH415_SYSCFG_642 0x0a8
+#define STIH416_SYSCFG_7543 0x87c
+#define STIH407_SYSCFG_5102 0x198
+#define STID127_SYSCFG_734 0x088
+
+#define ST_A9_IRQ_MASK 0x001FFFFF
+#define ST_A9_IRQ_MAX_CHANS 2
+
+#define ST_A9_IRQ_EN_CTI_0 BIT(0)
+#define ST_A9_IRQ_EN_CTI_1 BIT(1)
+#define ST_A9_IRQ_EN_PMU_0 BIT(2)
+#define ST_A9_IRQ_EN_PMU_1 BIT(3)
+#define ST_A9_IRQ_EN_pl310_L2 BIT(4)
+#define ST_A9_IRQ_EN_EXT_0 BIT(5)
+#define ST_A9_IRQ_EN_EXT_1 BIT(6)
+#define ST_A9_IRQ_EN_EXT_2 BIT(7)
+
+#define ST_A9_FIQ_N_SEL(dev, chan) (dev << (8 + (chan * 3)))
+#define ST_A9_IRQ_N_SEL(dev, chan) (dev << (14 + (chan * 3)))
+#define ST_A9_EXTIRQ_INV_SEL(dev) (dev << 20)
+
+struct st_irq_syscfg {
+ struct regmap *regmap;
+ unsigned int syscfg;
+ unsigned int result;
+ bool ext_inverted;
+};
+
+static const struct of_device_id st_irq_syscfg_match[] = {
+ {
+ .compatible = "st,stih415-irq-syscfg",
+ .data = (void *)STIH415_SYSCFG_642,
+ },
+ {
+ .compatible = "st,stih416-irq-syscfg",
+ .data = (void *)STIH416_SYSCFG_7543,
+ },
+ {
+ .compatible = "st,stih407-irq-syscfg",
+ .data = (void *)STIH407_SYSCFG_5102,
+ },
+ {
+ .compatible = "st,stid127-irq-syscfg",
+ .data = (void *)STID127_SYSCFG_734,
+ },
+ {}
+};
+
+static int st_irq_xlate(struct platform_device *pdev,
+ int device, int channel, bool irq)
+{
+ struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
+
+ /* Set the device enable bit. */
+ switch (device) {
+ case ST_IRQ_SYSCFG_EXT_0 :
+ ddata->result |= ST_A9_IRQ_EN_EXT_0;
+ break;
+ case ST_IRQ_SYSCFG_EXT_1 :
+ ddata->result |= ST_A9_IRQ_EN_EXT_1;
+ break;
+ case ST_IRQ_SYSCFG_EXT_2 :
+ ddata->result |= ST_A9_IRQ_EN_EXT_2;
+ break;
+ case ST_IRQ_SYSCFG_CTI_0 :
+ ddata->result |= ST_A9_IRQ_EN_CTI_0;
+ break;
+ case ST_IRQ_SYSCFG_CTI_1 :
+ ddata->result |= ST_A9_IRQ_EN_CTI_1;
+ break;
+ case ST_IRQ_SYSCFG_PMU_0 :
+ ddata->result |= ST_A9_IRQ_EN_PMU_0;
+ break;
+ case ST_IRQ_SYSCFG_PMU_1 :
+ ddata->result |= ST_A9_IRQ_EN_PMU_1;
+ break;
+ case ST_IRQ_SYSCFG_pl310_L2 :
+ ddata->result |= ST_A9_IRQ_EN_pl310_L2;
+ break;
+ case ST_IRQ_SYSCFG_DISABLED :
+ return 0;
+ default :
+ dev_err(&pdev->dev, "Unrecognised device %d\n", device);
+ return -EINVAL;
+ }
+
+ /* Select IRQ/FIQ channel for device. */
+ ddata->result |= irq ?
+ ST_A9_IRQ_N_SEL(device, channel) :
+ ST_A9_FIQ_N_SEL(device, channel);
+
+ return 0;
+}
+
+static int st_irq_syscfg_enable(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
+ int channels, ret, i;
+ u32 device, invert;
+
+ channels = of_property_count_u32_elems(np, "st,irq-device");
+ if (channels != ST_A9_IRQ_MAX_CHANS) {
+ dev_err(&pdev->dev, "st,enable-irq-device must have 2 elems\n");
+ return -EINVAL;
+ }
+
+ channels = of_property_count_u32_elems(np, "st,fiq-device");
+ if (channels != ST_A9_IRQ_MAX_CHANS) {
+ dev_err(&pdev->dev, "st,enable-fiq-device must have 2 elems\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < channels; i++) {
+ of_property_read_u32_index(np,"st,irq-device", i, &device);
+
+ ret = st_irq_xlate(pdev, device, i, true);
+ if (ret)
+ return ret;
+
+ of_property_read_u32_index(np,"st,fiq-device", i, &device);
+
+ ret = st_irq_xlate(pdev, device, i, false);
+ if (ret)
+ return ret;
+ }
+
+ /* External IRQs may be inverted. */
+ of_property_read_u32(np, "st,invert-ext", &invert);
+ ddata->result |= ST_A9_EXTIRQ_INV_SEL(invert);
+
+ return regmap_update_bits(ddata->regmap, ddata->syscfg,
+ ST_A9_IRQ_MASK, ddata->result);
+}
+
+int st_irq_syscfg_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ struct st_irq_syscfg *ddata;
+
+ match = of_match_device(st_irq_syscfg_match, &pdev->dev);
+ if (!np)
+ return -ENODEV;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(ddata->regmap)) {
+ dev_err(&pdev->dev, "syscfg phandle missing\n");
+ return PTR_ERR(ddata->regmap);
+ }
+
+ dev_set_drvdata(&pdev->dev, ddata);
+
+ return st_irq_syscfg_enable(pdev);
+}
+
+static int st_irq_syscfg_resume(struct device *dev)
+{
+ struct st_irq_syscfg *ddata = dev_get_drvdata(dev);
+
+ return regmap_update_bits(ddata->regmap, ddata->syscfg,
+ ST_A9_IRQ_MASK, ddata->result);
+}
+
+static SIMPLE_DEV_PM_OPS(st_irq_syscfg_pm_ops, NULL, st_irq_syscfg_resume);
+
+static struct platform_driver st_irq_syscfg_driver = {
+ .driver = {
+ .name = "st_irq_syscfg",
+ .pm = &st_irq_syscfg_pm_ops,
+ .of_match_table = st_irq_syscfg_match,
+ },
+ .probe = st_irq_syscfg_probe,
+};
+
+static int __init st_irq_syscfg_init(void)
+{
+ return platform_driver_register(&st_irq_syscfg_driver);
+}
+core_initcall(st_irq_syscfg_init);
--
1.9.1
More information about the linux-arm-kernel
mailing list