[PATCH v2 RESEND 1/2] clk: Add CLPS711X clk driver

Mike Turquette mturquette at linaro.org
Mon Jul 28 23:33:56 PDT 2014


Quoting Alexander Shiyan (2014-07-12 21:37:52)
> This adds the clock driver for Cirrus Logic CLPS711X series SoCs
> using common clock infrastructure.
> Designed primarily for migration CLPS711X subarch for multiplatform & DT,
> for this as the "OF" and "non-OF" calls implemented.
> 
> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> Acked-by: Arnd Bergmann <arnd at arndb.de>

Applied patches 1 & 2 to clk-next.

Regards,
Mike

> ---
>  drivers/clk/Makefile                       |   1 +
>  drivers/clk/clk-clps711x.c                 | 192 +++++++++++++++++++++++++++++
>  include/dt-bindings/clock/clps711x-clock.h |  27 ++++
>  3 files changed, 220 insertions(+)
>  create mode 100644 drivers/clk/clk-clps711x.c
>  create mode 100644 include/dt-bindings/clock/clps711x-clock.h
> 
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 312742c..c57728e 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_COMMON_CLK)      += clk-fractional-divider.o
>  obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)    += clk-axi-clkgen.o
>  obj-$(CONFIG_ARCH_AXXIA)               += clk-axm5516.o
>  obj-$(CONFIG_ARCH_BCM2835)             += clk-bcm2835.o
> +obj-$(CONFIG_ARCH_CLPS711X)            += clk-clps711x.o
>  obj-$(CONFIG_ARCH_EFM32)               += clk-efm32gg.o
>  obj-$(CONFIG_ARCH_HIGHBANK)            += clk-highbank.o
>  obj-$(CONFIG_MACH_LOONGSON1)           += clk-ls1x.o
> diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c
> new file mode 100644
> index 0000000..715eec1
> --- /dev/null
> +++ b/drivers/clk/clk-clps711x.c
> @@ -0,0 +1,192 @@
> +/*
> + *  Cirrus Logic CLPS711X CLK driver
> + *
> + *  Copyright (C) 2014 Alexander Shiyan <shc_work at mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/syscon/clps711x.h>
> +
> +#include <dt-bindings/clock/clps711x-clock.h>
> +
> +#define CLPS711X_SYSCON1       (0x0100)
> +#define CLPS711X_SYSCON2       (0x1100)
> +#define CLPS711X_SYSFLG2       (CLPS711X_SYSCON2 + SYSFLG_OFFSET)
> +#define CLPS711X_PLLR          (0xa5a8)
> +
> +#define CLPS711X_EXT_FREQ      (13000000)
> +#define CLPS711X_OSC_FREQ      (3686400)
> +
> +static const struct clk_div_table spi_div_table[] = {
> +       { .val = 0, .div = 32, },
> +       { .val = 1, .div = 8, },
> +       { .val = 2, .div = 2, },
> +       { .val = 3, .div = 1, },
> +};
> +
> +static const struct clk_div_table timer_div_table[] = {
> +       { .val = 0, .div = 256, },
> +       { .val = 1, .div = 1, },
> +};
> +
> +struct clps711x_clk {
> +       struct clk_onecell_data clk_data;
> +       spinlock_t              lock;
> +       struct clk              *clks[CLPS711X_CLK_MAX];
> +};
> +
> +static struct clps711x_clk * __init _clps711x_clk_init(void __iomem *base,
> +                                                      u32 fref)
> +{
> +       u32 tmp, f_cpu, f_pll, f_bus, f_tim, f_pwm, f_spi;
> +       struct clps711x_clk *clps711x_clk;
> +       unsigned i;
> +
> +       if (!base)
> +               return ERR_PTR(-ENOMEM);
> +
> +       clps711x_clk = kzalloc(sizeof(*clps711x_clk), GFP_KERNEL);
> +       if (!clps711x_clk)
> +               return ERR_PTR(-ENOMEM);
> +
> +       spin_lock_init(&clps711x_clk->lock);
> +
> +       /* Read PLL multiplier value and sanity check */
> +       tmp = readl(base + CLPS711X_PLLR) >> 24;
> +       if (((tmp >= 10) && (tmp <= 50)) || !fref)
> +               f_pll = DIV_ROUND_UP(CLPS711X_OSC_FREQ * tmp, 2);
> +       else
> +               f_pll = fref;
> +
> +       tmp = readl(base + CLPS711X_SYSFLG2);
> +       if (tmp & SYSFLG2_CKMODE) {
> +               f_cpu = CLPS711X_EXT_FREQ;
> +               f_bus = CLPS711X_EXT_FREQ;
> +               f_spi = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 96);
> +               f_pll = 0;
> +               f_pwm = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 128);
> +       } else {
> +               f_cpu = f_pll;
> +               if (f_cpu > 36864000)
> +                       f_bus = DIV_ROUND_UP(f_cpu, 2);
> +               else
> +                       f_bus = 36864000 / 2;
> +               f_spi = DIV_ROUND_CLOSEST(f_cpu, 576);
> +               f_pwm = DIV_ROUND_CLOSEST(f_cpu, 768);
> +       }
> +
> +       if (tmp & SYSFLG2_CKMODE) {
> +               if (readl(base + CLPS711X_SYSCON2) & SYSCON2_OSTB)
> +                       f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 26);
> +               else
> +                       f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 24);
> +       } else
> +               f_tim = DIV_ROUND_CLOSEST(f_cpu, 144);
> +
> +       tmp = readl(base + CLPS711X_SYSCON1);
> +       /* Timer1 in free running mode.
> +        * Counter will wrap around to 0xffff when it underflows
> +        * and will continue to count down.
> +        */
> +       tmp &= ~(SYSCON1_TC1M | SYSCON1_TC1S);
> +       /* Timer2 in prescale mode.
> +        * Value writen is automatically re-loaded when
> +        * the counter underflows.
> +        */
> +       tmp |= SYSCON1_TC2M | SYSCON1_TC2S;
> +       writel(tmp, base + CLPS711X_SYSCON1);
> +
> +       clps711x_clk->clks[CLPS711X_CLK_DUMMY] =
> +               clk_register_fixed_rate(NULL, "dummy", NULL, CLK_IS_ROOT, 0);
> +       clps711x_clk->clks[CLPS711X_CLK_CPU] =
> +               clk_register_fixed_rate(NULL, "cpu", NULL, CLK_IS_ROOT, f_cpu);
> +       clps711x_clk->clks[CLPS711X_CLK_BUS] =
> +               clk_register_fixed_rate(NULL, "bus", NULL, CLK_IS_ROOT, f_bus);
> +       clps711x_clk->clks[CLPS711X_CLK_PLL] =
> +               clk_register_fixed_rate(NULL, "pll", NULL, CLK_IS_ROOT, f_pll);
> +       clps711x_clk->clks[CLPS711X_CLK_TIMERREF] =
> +               clk_register_fixed_rate(NULL, "timer_ref", NULL, CLK_IS_ROOT,
> +                                       f_tim);
> +       clps711x_clk->clks[CLPS711X_CLK_TIMER1] =
> +               clk_register_divider_table(NULL, "timer1", "timer_ref", 0,
> +                                          base + CLPS711X_SYSCON1, 5, 1, 0,
> +                                          timer_div_table, &clps711x_clk->lock);
> +       clps711x_clk->clks[CLPS711X_CLK_TIMER2] =
> +               clk_register_divider_table(NULL, "timer2", "timer_ref", 0,
> +                                          base + CLPS711X_SYSCON1, 7, 1, 0,
> +                                          timer_div_table, &clps711x_clk->lock);
> +       clps711x_clk->clks[CLPS711X_CLK_PWM] =
> +               clk_register_fixed_rate(NULL, "pwm", NULL, CLK_IS_ROOT, f_pwm);
> +       clps711x_clk->clks[CLPS711X_CLK_SPIREF] =
> +               clk_register_fixed_rate(NULL, "spi_ref", NULL, CLK_IS_ROOT,
> +                                       f_spi);
> +       clps711x_clk->clks[CLPS711X_CLK_SPI] =
> +               clk_register_divider_table(NULL, "spi", "spi_ref", 0,
> +                                          base + CLPS711X_SYSCON1, 16, 2, 0,
> +                                          spi_div_table, &clps711x_clk->lock);
> +       clps711x_clk->clks[CLPS711X_CLK_UART] =
> +               clk_register_fixed_factor(NULL, "uart", "bus", 0, 1, 10);
> +       clps711x_clk->clks[CLPS711X_CLK_TICK] =
> +               clk_register_fixed_rate(NULL, "tick", NULL, CLK_IS_ROOT, 64);
> +
> +       for (i = 0; i < CLPS711X_CLK_MAX; i++)
> +               if (IS_ERR(clps711x_clk->clks[i]))
> +                       pr_err("clk %i: register failed with %ld\n",
> +                              i, PTR_ERR(clps711x_clk->clks[i]));
> +
> +       return clps711x_clk;
> +}
> +
> +void __init clps711x_clk_init(void __iomem *base)
> +{
> +       struct clps711x_clk *clps711x_clk;
> +
> +       clps711x_clk = _clps711x_clk_init(base, 73728000);
> +
> +       BUG_ON(IS_ERR(clps711x_clk));
> +
> +       /* Clocksource */
> +       clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_TIMER1],
> +                           NULL, "clps711x-timer.0");
> +       clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_TIMER2],
> +                           NULL, "clps711x-timer.1");
> +
> +       /* Drivers */
> +       clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_PWM],
> +                           NULL, "clps711x-pwm");
> +       clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_UART],
> +                           NULL, "clps711x-uart.0");
> +       clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_UART],
> +                           NULL, "clps711x-uart.1");
> +}
> +
> +#ifdef CONFIG_OF
> +static void __init clps711x_clk_init_dt(struct device_node *np)
> +{
> +       void __iomem *base = of_iomap(np, 0);
> +       struct clps711x_clk *clps711x_clk;
> +       u32 fref = 0;
> +
> +       WARN_ON(of_property_read_u32(np, "startup-frequency", &fref));
> +
> +       clps711x_clk = _clps711x_clk_init(base, fref);
> +       BUG_ON(IS_ERR(clps711x_clk));
> +
> +       clps711x_clk->clk_data.clks = clps711x_clk->clks;
> +       clps711x_clk->clk_data.clk_num = CLPS711X_CLK_MAX;
> +       of_clk_add_provider(np, of_clk_src_onecell_get,
> +                           &clps711x_clk->clk_data);
> +}
> +CLK_OF_DECLARE(clps711x, "cirrus,clps711x-clk", clps711x_clk_init_dt);
> +#endif
> diff --git a/include/dt-bindings/clock/clps711x-clock.h b/include/dt-bindings/clock/clps711x-clock.h
> new file mode 100644
> index 0000000..0c4c80b
> --- /dev/null
> +++ b/include/dt-bindings/clock/clps711x-clock.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2014 Alexander Shiyan <shc_work at mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_CLPS711X_H
> +#define __DT_BINDINGS_CLOCK_CLPS711X_H
> +
> +#define CLPS711X_CLK_DUMMY     0
> +#define CLPS711X_CLK_CPU       1
> +#define CLPS711X_CLK_BUS       2
> +#define CLPS711X_CLK_PLL       3
> +#define CLPS711X_CLK_TIMERREF  4
> +#define CLPS711X_CLK_TIMER1    5
> +#define CLPS711X_CLK_TIMER2    6
> +#define CLPS711X_CLK_PWM       7
> +#define CLPS711X_CLK_SPIREF    8
> +#define CLPS711X_CLK_SPI       9
> +#define CLPS711X_CLK_UART      10
> +#define CLPS711X_CLK_TICK      11
> +#define CLPS711X_CLK_MAX       12
> +
> +#endif
> -- 
> 1.8.5.5
> 



More information about the linux-arm-kernel mailing list