[PATCH v15 05/12] document: dt: add the binding on HiP04

[Haojian Zhuang]

Add bootwrapper-phys, bootwrapper-size, bootwrapper-magic properties for
Hisilicon HiP04 SoC.

Signed-off-by: Haojian Zhuang <haojian.zhuang at linaro.org>
---
 .../devicetree/bindings/arm/hisilicon/hisilicon.txt | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 934f000..eca605a 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -5,6 +5,11 @@ Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
+HiP04 D01 Board
+Required root node properties:
+	- compatible = "hisilicon,hip04-d01";
+
+
 Hisilicon system controller
 
 Required properties:
@@ -19,6 +24,15 @@ Optional properties:
 		If reg value is not zero, cpun exit wfi and go
 - resume-offset : offset in sysctrl for notifying cpu0 when resume
 - reboot-offset : offset in sysctrl for system reboot
+- relocation-entry : relocation address of secondary cpu boot code
+- relocation-size : relocation size of secondary cpu boot code
+- bootwrapper-phys : physical address of boot wrapper
+- bootwrapper-size : size of boot wrapper
+- bootwrapper-magic : magic number for secondary cpu in boot wrapper
+The memory area of [bootwrapper-phys : bootwrapper-phys+bootwrapper-size]
+should be reserved. This should be set in /memreserve/ node in DTS file.
+bootwrapper-phys, bootwrapper-size, bootwrapper-magic is used in HiP04
+DTS file.
 
 Example:
 
@@ -55,3 +69,10 @@ Example:
 		compatible = "hisilicon,pctrl";
 		reg = <0xfca09000 0x1000>;
 	};
+
+-----------------------------------------------------------------------
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
-- 
1.9.1