[PATCH v2 10/15] ARM: dts: rockchip: add tps65910 regulator for bqcurie2
Heiko Stuebner
heiko at sntech.de
Sat Jul 26 16:18:26 PDT 2014
The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910
node as well as define the used voltages and regulator-names according to
the schematics.
Also fix the supply of the sd0 regulator, as it is supplied by the vio reg.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 87 ++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 38910f6..8b479f7 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -31,6 +31,7 @@
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
};
gpio-keys {
@@ -59,6 +60,92 @@
};
};
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps at 2d {
+ reg = <0x2d>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_io>;
+
+ regulators {
+ vcc_rtc: regulator at 0 {
+ regulator-name = "vcc_rtc";
+ regulator-always-on;
+ };
+
+ vcc_io: regulator at 1 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ };
+
+ vdd_arm: regulator at 2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_ddr: regulator at 3 {
+ regulator-name = "vcc_ddr";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc18_cif: regulator at 5 {
+ regulator-name = "vcc18_cif";
+ regulator-always-on;
+ };
+
+ vdd_11: regulator at 6 {
+ regulator-name = "vdd_11";
+ regulator-always-on;
+ };
+
+ vcc_25: regulator at 7 {
+ regulator-name = "vcc_25";
+ regulator-always-on;
+ };
+
+ vcc_18: regulator at 8 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ };
+
+ vcc25_hdmi: regulator at 9 {
+ regulator-name = "vcc25_hdmi";
+ regulator-always-on;
+ };
+
+ vcca_33: regulator at 10 {
+ regulator-name = "vcca_33";
+ regulator-always-on;
+ };
+
+ vcc_tp: regulator at 11 {
+ regulator-name = "vcc_tp";
+ regulator-always-on;
+ };
+
+ vcc28_cif: regulator at 12 {
+ regulator-name = "vcc28_cif";
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
&mmc0 { /* sdmmc */
num-slots = <1>;
status = "okay";
--
2.0.1
More information about the linux-arm-kernel
mailing list