[PATCH] ARM: mvebu: armada xp: Generalize use of i2c quirk

[Andrew Lunn]

A second product has come to light which makes use of the A0 stepping
of the Armada XP SoC. A0 stepping has a hardware bug in the i2c core
meaning that hardware offload does not work, resulting in the kernel
failing to boot. The quirk detects that the kernel is running on an A0
stepping SoC and disables the use of hardware offload.

Currently the quirk is only enabled for PlatHome Openblocks AX3. The
AX3 has been produced with both A0 and B1 stepping SoCs. The second
product is the Lenovo Iomega IX4-300d. It seems likely that this
device will also swap from A0 to B1 SoC sometime during its life.

If there are two products using A0, it seems likely there are more
products with A0. Also, since the number of A0 SoCs is limited, these
products are also likely to transition to B1. Hence detecting at run
time is the safest option. So enable the quirk for all Armada XP
boards.

Tested on an AX3 with A0 stepping.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
 arch/arm/mach-mvebu/board-v7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 8bb742fdf5ca..be080cff98d2 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -167,7 +167,7 @@ static void __init thermal_quirk(void)
 
 static void __init mvebu_dt_init(void)
 {
-	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
 	if (of_machine_is_compatible("marvell,a375-db"))
 		thermal_quirk();
-- 
2.0.1