[PATCH 10/19] ARM64 / ACPI: Get the enable method for SMP initialization in ACPI way

[Mark Rutland]

On Fri, Jul 25, 2014 at 11:51:37AM +0100, Hanjun Guo wrote:
> On 2014-7-24 23:47, Mark Rutland wrote:
> > On Thu, Jul 24, 2014 at 02:00:16PM +0100, Hanjun Guo wrote:
> >> ACPI 5.1 only has two explicit methods to boot up SMP,
> >> PSCI and Parking protocol, but the Parking protocol is
> >> only suitable for ARMv7 now, so make PSCI as the only way
> >> for the SMP boot protocol before some updates for the
> >> ACPI spec or the Parking protocol spec.
> >>
> >> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
> >> Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
> >> ---
> >>  arch/arm64/include/asm/acpi.h    |   21 +++++++++++++++
> >>  arch/arm64/include/asm/cpu_ops.h |    9 ++++++-
> >>  arch/arm64/include/asm/smp.h     |    2 +-
> >>  arch/arm64/kernel/acpi.c         |    9 +++++++
> >>  arch/arm64/kernel/cpu_ops.c      |   52 ++++++++++++++++++++++++++++++++++----
> >>  arch/arm64/kernel/smp.c          |   29 +++++++++++++++++++--
> >>  6 files changed, 113 insertions(+), 9 deletions(-)
> [...]
> >>  /*
> >> - * Setup the set of possible CPUs (via set_cpu_possible)
> >> + * Platform specific SMP operations
> >>   */
> >>  extern void smp_init_cpus(void);
> > 
> > While the originial comment is out of date, the new form is plain wrong.
> > 
> > Something like "Discover the set of possible CPUs and determine their
> > SMP operations" would be a better description of what's going on here.
> 
> Agreed.

Ok.

> > 
> >>
> >> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> >> index ff0f6a0..2af6662 100644
> >> --- a/arch/arm64/kernel/acpi.c
> >> +++ b/arch/arm64/kernel/acpi.c
> >> @@ -184,6 +184,15 @@ static int __init acpi_parse_madt_gic_cpu_interface_entries(void)
> >>         return 0;
> >>  }
> >>
> >> +/* Protocol to bring up secondary CPUs */
> >> +enum acpi_smp_boot_protocol smp_boot_protocol(void)
> >> +{
> >> +       if (acpi_psci_present)
> >> +               return ACPI_SMP_BOOT_PSCI;
> >> +       else
> >> +               return ACPI_SMP_BOOT_PARKING_PROTOCOL;
> >> +}
> >> +
> >>  static int __init acpi_parse_fadt(struct acpi_table_header *table)
> >>  {
> >>         struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
> >> diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
> >> index d62d12f..4d9b3cf 100644
> >> --- a/arch/arm64/kernel/cpu_ops.c
> >> +++ b/arch/arm64/kernel/cpu_ops.c
> >> @@ -16,11 +16,13 @@
> >>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> >>   */
> >>
> >> -#include <asm/cpu_ops.h>
> >> -#include <asm/smp_plat.h>
> >>  #include <linux/errno.h>
> >>  #include <linux/of.h>
> >>  #include <linux/string.h>
> >> +#include <linux/acpi.h>
> >> +
> >> +#include <asm/cpu_ops.h>
> >> +#include <asm/smp_plat.h>
> > 
> > Was the header move just for consistency with other files, or is there
> > some ordering requirement here?
> 
> Ordering requirement, it will meet compile error for "return -ENODEV;"
> in the head file which I introduced, I know I can include the right
> head file in asm/cpu_ops.h, but I think move the asm/xx.h after the
> include of linux/xx.h would be fine.

If a file uses something defined in a header, it should include that
header. So if you need ENODEV in cpu_ops.h, make cpu_ops.h include
<linux/errno.h>. It is not fine to deliberately rely on implicit
includes.

Moving the headers around is a separate issue. I have no problem with
doing that for consistency with other files.

> 
> > 
> >>
> >>  extern const struct cpu_operations smp_spin_table_ops;
> >>  extern const struct cpu_operations cpu_psci_ops;
> >> @@ -52,7 +54,7 @@ static const struct cpu_operations * __init cpu_get_ops(const char *name)
> >>  /*
> >>   * Read a cpu's enable method from the device tree and record it in cpu_ops.
> >>   */
> >> -int __init cpu_read_ops(struct device_node *dn, int cpu)
> >> +int __init cpu_of_read_ops(struct device_node *dn, int cpu)
> >>  {
> >>         const char *enable_method = of_get_property(dn, "enable-method", NULL);
> >>         if (!enable_method) {
> >> @@ -76,12 +78,52 @@ int __init cpu_read_ops(struct device_node *dn, int cpu)
> >>         return 0;
> >>  }
> >>
> >> +#ifdef CONFIG_ACPI
> >> +/*
> >> + * Read a cpu's enable method in the ACPI way and record it in cpu_ops.
> >> + */
> >> +int __init cpu_acpi_read_ops(int cpu)
> >> +{
> >> +       /*
> >> +        * For ACPI 5.1, only two kind of methods are provided,
> >> +        * Parking protocol and PSCI, but Parking protocol is
> >> +        * used on ARMv7 only, so make PSCI as the only method
> >> +        * for SMP initialization before the ACPI spec or Parking
> >> +        * protocol spec is updated.
> >> +        */
> > 
> > That comment is a little misleading. The parking protocol is _specified_
> > for ARMv7 only.
> 
> Agreed. But I'm just wondering if the Parking protocol is modified and
> then support ARMv8, how to describe it in the comments?

We update the comments if and when that happens.

> > 
> >> +       switch (smp_boot_protocol()) {
> >> +       case ACPI_SMP_BOOT_PSCI:
> >> +               cpu_ops[cpu] = cpu_get_ops("psci");
> >> +               break;
> >> +       case ACPI_SMP_BOOT_PARKING_PROTOCOL:
> >> +       default:
> >> +               cpu_ops[cpu] = NULL;
> >> +               break;
> >> +       }
> >> +
> >> +       if (!cpu_ops[cpu]) {
> >> +               pr_warn("CPU %d: unsupported enable-method, only PSCI is supported\n",
> >> +                       cpu);
> >> +               return -EOPNOTSUPP;
> >> +       }
> > 
> > That's going to require changes as things get updated, and
> > "enable-method" is a term from DT rather than ACPI.
> > 
> > How about:
> > 
> > 	"CPU%d: boot protocol unsupported or unknown\n".
> 
> Pretty fine to me :)

Ok.

Cheers,
Mark.