[PATCH 07/19] ARM64 / ACPI: Parse MADT to map logical cpu to MPIDR and get cpu_possible/present_map
Naresh Bhat
naresh.bhat at linaro.org
Thu Jul 24 16:06:59 PDT 2014
On 24 July 2014 18:30, Hanjun Guo <hanjun.guo at linaro.org> wrote:
> MADT contains the information for MPIDR which is essential for
> SMP initialization, parse the GIC cpu interface structures to
> get the MPIDR value and map it to cpu_logical_map(), and add
> enabled cpu with valid MPIDR into cpu_possible_map and
> cpu_present_map.
>
> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
> Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
> ---
> arch/arm64/include/asm/acpi.h | 2 +
> arch/arm64/kernel/acpi.c | 127 +++++++++++++++++++++++++++++++++++++++++
> arch/arm64/kernel/smp.c | 10 +++-
> 3 files changed, 138 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index 67dac90..5ce85f8 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -50,6 +50,8 @@ static inline bool acpi_has_cpu_in_madt(void)
> extern int (*acpi_suspend_lowlevel)(void);
> #define acpi_wakeup_address 0
>
> +#define MAX_GIC_CPU_INTERFACE 65535
> +
> #endif /* CONFIG_ACPI */
>
> #endif /*_ASM_ACPI_H*/
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index 374926f..801e268 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -22,6 +22,9 @@
> #include <linux/bootmem.h>
> #include <linux/smp.h>
>
> +#include <asm/smp_plat.h>
> +#include <asm/cputype.h>
> +
> /*
> * We never plan to use RSDT on arm/arm64 as its deprecated in spec but this
> * variable is still required by the ACPI core
> @@ -42,6 +45,9 @@ int acpi_psci_present;
> /* 1 to indicate HVC must be used instead of SMC as the PSCI conduit */
> int acpi_psci_use_hvc;
>
> +/* Processors (GICC) with enabled flag in MADT */
> +static int enabled_cpus;
> +
> /*
> * __acpi_map_table() will be called before page_init(), so early_ioremap()
> * or early_memremap() should be called here to for ACPI table mapping.
> @@ -62,6 +68,122 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
> early_iounmap(map, size);
> }
>
> +/**
> + * acpi_register_gic_cpu_interface - register a gic cpu interface and
> + * generates a logic cpu number
logic - logical
> + * @mpidr: CPU's hardware id to register, MPIDR represented in MADT
> + * @enabled: this cpu is enabled or not
> + *
> + * Returns the logic cpu number which maps to the gic cpu interface
logic - logical
> + */
> +static int acpi_register_gic_cpu_interface(u64 mpidr, u8 enabled)
> +{
> + int cpu;
> +
> + if (mpidr == INVALID_HWID) {
> + pr_info("Skip invalid cpu hardware ID\n");
> + return -EINVAL;
> + }
> +
> + total_cpus++;
> + if (!enabled)
> + return -EINVAL;
> +
> + if (enabled_cpus >= NR_CPUS) {
> + pr_warn("NR_CPUS limit of %d reached, Processor %d/0x%llx ignored.\n",
> + NR_CPUS, total_cpus, mpidr);
> + return -EINVAL;
> + }
> +
> + /* If it is the first CPU, no need to check duplicate MPIDRs */
> + if (!enabled_cpus)
> + goto skip_mpidr_check;
> +
> + /*
> + * Duplicate MPIDRs are a recipe for disaster. Scan
> + * all initialized entries and check for
> + * duplicates. If any is found just ignore the CPU.
> + */
> + for_each_present_cpu(cpu) {
> + if (cpu_logical_map(cpu) == mpidr) {
> + pr_err("Firmware bug, duplicate CPU MPIDR: 0x%llx in MADT\n",
> + mpidr);
> + return -EINVAL;
> + }
> + }
> +
> +skip_mpidr_check:
> + enabled_cpus++;
> +
> + /* allocate a logic cpu id for the new comer */
logic - logical
> + if (cpu_logical_map(0) == mpidr) {
> + /*
> + * boot_cpu_init() already hold bit 0 in cpu_present_mask
> + * for BSP, no need to allocte again.
allocte - allocate
> + */
> + cpu = 0;
> + } else {
> + cpu = cpumask_next_zero(-1, cpu_present_mask);
> + }
> +
> + /* map the logic cpu id to cpu MPIDR */
logic - logical
> + cpu_logical_map(cpu) = mpidr;
> +
> + set_cpu_possible(cpu, true);
> + set_cpu_present(cpu, true);
> +
> + return cpu;
> +}
> +
> +static int __init
> +acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct acpi_madt_generic_interrupt *processor;
> +
> + processor = (struct acpi_madt_generic_interrupt *)header;
> +
> + if (BAD_MADT_ENTRY(processor, end))
> + return -EINVAL;
> +
> + acpi_table_print_madt_entry(header);
> +
> + acpi_register_gic_cpu_interface(processor->mpidr,
> + processor->flags & ACPI_MADT_ENABLED);
> +
> + return 0;
> +}
> +
> +/*
> + * Parse GIC cpu interface related entries in MADT
> + * returns 0 on success, < 0 on error
> + */
> +static int __init acpi_parse_madt_gic_cpu_interface_entries(void)
> +{
> + int count;
> +
> + /*
> + * do a partial walk of MADT to determine how many CPUs
> + * we have including disabled CPUs, and get information
> + * we need for SMP init
> + */
> + count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
> + acpi_parse_gic_cpu_interface, MAX_GIC_CPU_INTERFACE);
> +
> + if (!count) {
> + pr_err("No GIC CPU interface entries present\n");
> + return -ENODEV;
> + } else if (count < 0) {
> + pr_err("Error parsing GIC CPU interface entry\n");
> + return count;
> + }
> +
> + /* Make boot-up look pretty */
> + pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
> +
> + return 0;
> +}
> +
> static int __init acpi_parse_fadt(struct acpi_table_header *table)
> {
> struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
> @@ -122,6 +244,11 @@ int __init acpi_boot_init(void)
> if (err)
> pr_err("Can't find FADT\n");
>
> + /* Get the boot CPU's MPIDR before MADT parsing */
> + cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
> +
> + err = acpi_parse_madt_gic_cpu_interface_entries();
> +
> return err;
> }
>
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index 40f38f4..8f1d37c 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -36,6 +36,7 @@
> #include <linux/completion.h>
> #include <linux/of.h>
> #include <linux/irq_work.h>
> +#include <linux/acpi.h>
>
> #include <asm/atomic.h>
> #include <asm/cacheflush.h>
> @@ -458,7 +459,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> if (err)
> continue;
>
> - set_cpu_present(cpu, true);
> + /*
> + * In ACPI mode, cpu_present_map was initialised when
> + * MADT table was parsed which before this function
> + * is called.
> + */
> + if (acpi_disabled)
> + set_cpu_present(cpu, true);
> +
> max_cpus--;
> }
> }
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list