[PATCH v2 0/3] Add USB HCD support for STi SoCs

[Peter Griffin]

This driver adds support for the USB HCD controller present in STi
SoC's from STMicroelectronics. It has been tested on the stih416-b2020
board.

The original author is no longer with the company and therefore emails
to his address bounce, thus I have not added him to CC.

Changes since v1:
 - Correct s/OCHI/OHCI/ spelling
 - Improve kconfig help message
 - Various formating / spelling nits identified by Lee Jones
 - Make driver depend on OF & remove node checks in code
 - Use devm_ioremap_resource
 - Remove unnecessary header files

Peter Griffin (3):
  usb: host: st-hcd: Add USB HCD support for STi SoCs
  usb: host: st-hcd: Add st-hcd devicetree bindings documentation.
  MAINTAINERS: Add st-hcd to ARCH/STI architecture

 Documentation/devicetree/bindings/usb/st-hcd.txt |  51 +++
 MAINTAINERS                                      |   1 +
 drivers/usb/host/Kconfig                         |  13 +
 drivers/usb/host/Makefile                        |   1 +
 drivers/usb/host/st-hcd.c                        | 471 +++++++++++++++++++++++
 5 files changed, 537 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/st-hcd.txt
 create mode 100644 drivers/usb/host/st-hcd.c

-- 
1.9.1