[PATCHv3 15/16] ARM: mvebu: add cpuidle support for Armada 38x
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Wed Jul 23 06:00:52 PDT 2014
From: Gregory CLEMENT <gregory.clement at free-electrons.com>
Unlike the Armada XP and the Armada 370, this SoC uses a Cortex A9
core. Consequently, the procedure to enter the idle state is
different: interaction with the SCU, not disabling snooping, etc.
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
arch/arm/mach-mvebu/pmsu.c | 85 ++++++++++++++++++++++++++++++++++++++++++-
arch/arm/mach-mvebu/pmsu_ll.S | 14 +++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 9190ae8..bd7c66a 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -29,6 +29,7 @@
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
@@ -63,6 +64,18 @@
#define L2C_NFABRIC_PM_CTL 0x4
#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
+/* PMSU delay registers */
+#define PMSU_POWERDOWN_DELAY 0xF04
+#define PMSU_POWERDOWN_DELAY_PMU BIT(1)
+#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE
+#define PMSU_DFLT_ARMADA38X_DELAY 0x64
+
+/* CA9 MPcore SoC Control registers */
+
+#define MPCORE_RESET_CTL 0x64
+#define MPCORE_RESET_CTL_L2 BIT(0)
+#define MPCORE_RESET_CTL_DEBUG BIT(16)
+
#define SRAM_PHYS_BASE 0xFFFF0000
#define BOOTROM_BASE 0xFFF00000
#define BOOTROM_SIZE 0x100000
@@ -74,6 +87,8 @@ extern void ll_disable_coherency(void);
extern void ll_enable_coherency(void);
extern void armada_370_xp_cpu_resume(void);
+extern void armada_38x_cpu_resume(void);
+
static phys_addr_t pmsu_mp_phys_base;
static void __iomem *pmsu_mp_base;
@@ -287,6 +302,32 @@ static int armada_370_xp_cpu_suspend(unsigned long deepidle)
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
+static int armada_38x_do_cpu_suspend(unsigned long deepidle)
+{
+ unsigned long flags = 0;
+
+ if (deepidle)
+ flags |= PMSU_PREPARE_DEEP_IDLE;
+
+ mvebu_v7_pmsu_idle_prepare(flags);
+ /*
+ * Already flushed cache, but do it again as the outer cache
+ * functions dirty the cache with spinlocks
+ */
+ v7_exit_coherency_flush(louis);
+
+ scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF);
+
+ cpu_do_idle();
+
+ return 1;
+}
+
+static int armada_38x_cpu_suspend(unsigned long deepidle)
+{
+ return cpu_suspend(false, armada_38x_do_cpu_suspend);
+}
+
/* No locking is needed because we only access per-CPU registers */
void mvebu_v7_pmsu_idle_exit(void)
{
@@ -295,7 +336,6 @@ void mvebu_v7_pmsu_idle_exit(void)
if (pmsu_mp_base == NULL)
return;
-
/* cancel ask HW to power down the L2 Cache if possible */
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
@@ -359,6 +399,47 @@ static __init int armada_370_cpuidle_init(void)
return 0;
}
+static __init int armada_38x_cpuidle_init(void)
+{
+ struct device_node *np;
+ void __iomem *mpsoc_base;
+ u32 reg;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-380-coherency-fabric");
+ if (!np)
+ return -ENODEV;
+ of_node_put(np);
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-380-mpcore-soc-ctrl");
+ if (!np)
+ return -ENODEV;
+ mpsoc_base = of_iomap(np, 0);
+ BUG_ON(!mpsoc_base);
+ of_node_put(np);
+
+ /* Set up reset mask when powering down the cpus */
+ reg = readl(mpsoc_base + MPCORE_RESET_CTL);
+ reg |= MPCORE_RESET_CTL_L2;
+ reg |= MPCORE_RESET_CTL_DEBUG;
+ writel(reg, mpsoc_base + MPCORE_RESET_CTL);
+ iounmap(mpsoc_base);
+
+ /* Set up delay */
+ reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY);
+ reg &= ~PMSU_POWERDOWN_DELAY_MASK;
+ reg |= PMSU_DFLT_ARMADA38X_DELAY;
+ reg |= PMSU_POWERDOWN_DELAY_PMU;
+ writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY);
+
+ mvebu_cpu_resume = armada_38x_cpu_resume;
+ mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
+ mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
+
+ return 0;
+}
+
static __init int armada_xp_cpuidle_init(void)
{
struct device_node *np;
@@ -389,6 +470,8 @@ static int __init mvebu_v7_cpu_pm_init(void)
ret = armada_xp_cpuidle_init();
else if (of_machine_is_compatible("marvell,armada370"))
ret = armada_370_cpuidle_init();
+ else if (of_machine_is_compatible("marvell,armada380"))
+ ret = armada_38x_cpuidle_init();
else
return 0;
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index 17d7f3b..a945756 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -23,6 +23,20 @@ ARM_BE8(setend be ) @ go BE8 if entered LE
b cpu_resume
ENDPROC(armada_370_xp_cpu_resume)
+ENTRY(armada_38x_cpu_resume)
+ /* do we need it for Armada 38x*/
+ARM_BE8(setend be ) @ go BE8 if entered LE
+ bl v7_invalidate_l1
+ mrc p15, 4, r1, c15, c0 @ get SCU base address
+ orr r1, r1, #0x8 @ SCU CPU Power Status Register
+ mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
+ and r0, r0, #15
+ add r1, r1, r0
+ mov r0, #0x0
+ strb r0, [r1] @ switch SCU power state to Normal mode
+ b cpu_resume
+ENDPROC(armada_38x_cpu_resume)
+
.global mvebu_boot_wa_start
.global mvebu_boot_wa_end
--
2.0.0
More information about the linux-arm-kernel
mailing list