OMAP2+: gpmc: fix gpmc_hwecc_bch_capable()
Tony Lindgren
tony at atomide.com
Wed Jul 23 01:50:03 PDT 2014
* Gupta, Pekon <pekon at ti.com> [140713 22:43]:
> >From: Christoph Fritz [mailto:chf.fritz at googlemail.com]
> >
> >This patch adds bch8 ecc software fallback which is mostly used by
> >omap3s because they lack hardware elm support.
> >
> >Fixes: 0611c41934ab35ce84dea34ab291897ad3cbc7be (ARM: OMAP2+: gpmc:
> >update gpmc_hwecc_bch_capable() for new platforms and ECC schemes)
> >Cc: <stable at vger.kernel.org> # 3.15.x+
> >Signed-off-by: Christoph Fritz <chf.fritz at googlemail.com>
> >---
> > arch/arm/mach-omap2/gpmc-nand.c | 18 ++++++++++--------
> > 1 file changed, 10 insertions(+), 8 deletions(-)
> >
> >diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
> >index 17cd393..93914d2 100644
> >--- a/arch/arm/mach-omap2/gpmc-nand.c
> >+++ b/arch/arm/mach-omap2/gpmc-nand.c
> >@@ -50,6 +50,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
> > soc_is_omap54xx() || soc_is_dra7xx())
> > return 1;
> >
> >+ if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
> >+ ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
> >+ if (cpu_is_omap24xx())
> >+ return 0;
> >+ else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
> >+ return 0;
> >+ else
> >+ return 1;
> >+ }
> >+
> > /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
> > * which require H/W based ECC error detection */
> > if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
> >@@ -57,14 +67,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
> > (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
> > return 0;
> >
> >- /*
> >- * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
> >- * and AM33xx derivates. Other chips may be added if confirmed to work.
> >- */
> >- if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
> >- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
> >- return 0;
> >-
> > /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
> > if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
> > return 1;
> >--
> >1.7.10.4
> >
> Thanks much for this fix.
> Reviewed-by: Pekon Gupta <pekon at ti.com>
Applying into omap-for-v3.16/fixes thanks.
Tony
More information about the linux-arm-kernel
mailing list