[PATCH v7 3/5] PCI: designware: enhance dw_pcie_host_init() to support v3.65 DW hardware

[Jingoo Han]

On Tuesday, July 22, 2014 1:59 AM, Murali Karicheri wrote:
> 
> keystone PCI controller is based on v3.65 designware hardware. This
> version differs from newer versions of the hardware in few functional
> areas discussed below that makes it necessary to change dw_pcie_host_init()
> to support v3.65 based PCI controller.
> 
>  1. No support for ATU port. So any ATU specific resource handling code
>     is to be bypassed for v3.65 h/w.
>  2. MSI controller uses Application space to implement MSI and 32 MSI
>     interrupts are multiplexed over 8 IRQs to the host. Hence the code
>     to process MSI IRQ needs to be different. This patch allows platform
>     driver to provide its own irq_domain_ops ptr to irq_domain_add_linear()
>     through an API callback from the designware core driver.
>  3. MSI interrupt generation requires EP to write to the RC's application
>     register. So enhance the driver to allow setup of inbound access to
>     MSI irq register as a post scan bus API callback.
> 
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
> Reviewed-by: Pratyush Anand <pratyush.anand at st.com>
> Acked-by: Mohit KUMAR <mohit.kumar at st.com>
> 
> CC: Santosh Shilimkar <santosh.shilimkar at ti.com>
> CC: Russell King <linux at arm.linux.org.uk>
> CC: Grant Likely <grant.likely at linaro.org>
> CC: Rob Herring <robh+dt at kernel.org>
> CC: Jingoo Han <jg1.han at samsung.com>

Acked-by: Jingoo Han <jg1.han at samsung.com>

Best regards,
Jingoo Han

> CC: Bjorn Helgaas <bhelgaas at google.com>
> CC: Richard Zhu <r65037 at freescale.com>
> CC: Kishon Vijay Abraham I <kishon at ti.com>
> CC: Marek Vasut <marex at denx.de>
> CC: Arnd Bergmann <arnd at arndb.de>
> CC: Pawel Moll <pawel.moll at arm.com>
> CC: Mark Rutland <mark.rutland at arm.com>
> CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
> CC: Kumar Gala <galak at codeaurora.org>
> CC: Randy Dunlap <rdunlap at infradead.org>
> CC: Grant Likely <grant.likely at linaro.org>
> ---
>  drivers/pci/host/pcie-designware.c |   54 +++++++++++++++++++++++-------------
>  drivers/pci/host/pcie-designware.h |    2 ++
>  2 files changed, 36 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 905941c..35bb4af 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -420,8 +420,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>  	struct device_node *np = pp->dev->of_node;
>  	struct of_pci_range range;
>  	struct of_pci_range_parser parser;
> +	int i, ret;
>  	u32 val;
> -	int i;
> 
>  	if (of_pci_range_parser_init(&parser, np)) {
>  		dev_err(pp->dev, "missing ranges property\n");
> @@ -467,21 +467,26 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>  		}
>  	}
> 
> -	pp->cfg0_base = pp->cfg.start;
> -	pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
>  	pp->mem_base = pp->mem.start;
> 
> -	pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
> -					pp->config.cfg0_size);
>  	if (!pp->va_cfg0_base) {
> -		dev_err(pp->dev, "error with ioremap in function\n");
> -		return -ENOMEM;
> +		pp->cfg0_base = pp->cfg.start;
> +		pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
> +						pp->config.cfg0_size);
> +		if (!pp->va_cfg0_base) {
> +			dev_err(pp->dev, "error with ioremap in function\n");
> +			return -ENOMEM;
> +		}
>  	}
> -	pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
> -					pp->config.cfg1_size);
> +
>  	if (!pp->va_cfg1_base) {
> -		dev_err(pp->dev, "error with ioremap\n");
> -		return -ENOMEM;
> +		pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
> +		pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
> +						pp->config.cfg1_size);
> +		if (!pp->va_cfg1_base) {
> +			dev_err(pp->dev, "error with ioremap\n");
> +			return -ENOMEM;
> +		}
>  	}
> 
>  	if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
> @@ -490,16 +495,22 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>  	}
> 
>  	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> -		pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
> -					MAX_MSI_IRQS, &msi_domain_ops,
> -					&dw_pcie_msi_chip);
> -		if (!pp->irq_domain) {
> -			dev_err(pp->dev, "irq domain init failed\n");
> -			return -ENXIO;
> -		}
> +		if (!pp->ops->msi_host_init) {
> +			pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
> +						MAX_MSI_IRQS, &msi_domain_ops,
> +						&dw_pcie_msi_chip);
> +			if (!pp->irq_domain) {
> +				dev_err(pp->dev, "irq domain init failed\n");
> +				return -ENXIO;
> +			}
> 
> -		for (i = 0; i < MAX_MSI_IRQS; i++)
> -			irq_create_mapping(pp->irq_domain, i);
> +			for (i = 0; i < MAX_MSI_IRQS; i++)
> +				irq_create_mapping(pp->irq_domain, i);
> +		} else {
> +			ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
> +			if (ret < 0)
> +				return ret;
> +		}
>  	}
> 
>  	if (pp->ops->host_init)
> @@ -759,6 +770,9 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>  		BUG();
>  	}
> 
> +	if (bus && pp->ops->scan_bus)
> +		pp->ops->scan_bus(pp);
> +
>  	return bus;
>  }
> 
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
> index 387f69e..080c649 100644
> --- a/drivers/pci/host/pcie-designware.h
> +++ b/drivers/pci/host/pcie-designware.h
> @@ -70,6 +70,8 @@ struct pcie_host_ops {
>  	void (*msi_set_irq)(struct pcie_port *pp, int irq);
>  	void (*msi_clear_irq)(struct pcie_port *pp, int irq);
>  	u32 (*get_msi_data)(struct pcie_port *pp);
> +	void (*scan_bus)(struct pcie_port *pp);
> +	int (*msi_host_init)(struct pcie_port *pp, struct msi_chip *chip);
>  };
> 
>  int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
> --
> 1.7.9.5