[PATCH 1/2] iio: adc: exynos_adc: add support for s3c64xx adc

[Chanwoo Choi]

From: Arnd Bergmann <arnd at arndb.de>

The ADC in s3c64xx is almost the same as exynosv1, but
has a different 'select' method. Adding this here will be
helpful to move over the existing s3c64xx platform from the
legacy plat-samsung/adc driver to the new exynos-adc.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
---
 .../devicetree/bindings/arm/samsung/exynos-adc.txt |  2 ++
 drivers/iio/adc/exynos_adc.c                       | 32 +++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 6d34891..b6e3989 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -16,6 +16,8 @@ Required properties:
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
+			Must be "samsung,s3c6410-adc" for
+				the ADC in s3c6410 and compatibles
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 87e0895..05bdd2f12 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -40,12 +40,16 @@
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>
 
-/* EXYNOS4412/5250 ADC_V1 registers definitions */
+/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
 #define ADC_V1_CON(x)		((x) + 0x00)
+#define ADC_V1_TSC(x)		((x) + 0x04)
 #define ADC_V1_DLY(x)		((x) + 0x08)
 #define ADC_V1_DATX(x)		((x) + 0x0C)
+#define ADC_V1_DATY(x)		((x) + 0x10)
+#define ADC_V1_UPDN(x)		((x) + 0x14)
 #define ADC_V1_INTCLR(x)	((x) + 0x18)
 #define ADC_V1_MUX(x)		((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x)	((x) + 0x20)
 
 /* Future ADC_V2 registers definitions */
 #define ADC_V2_CON1(x)		((x) + 0x00)
@@ -61,6 +65,9 @@
 #define ADC_V1_CON_PRSCLV(x)	(((x) & 0xFF) << 6)
 #define ADC_V1_CON_STANDBY	(1u << 2)
 
+/* Bit definitions for S3C2410 ADC */
+#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) <<3)
+
 /* Bit definitions for ADC_V2 */
 #define ADC_V2_CON1_SOFT_RESET	(1u << 2)
 
@@ -217,6 +224,26 @@ static const struct exynos_adc_data const exynos_adc_v1_data = {
 	.start_conv	= exynos_adc_v1_start_conv,
 };
 
+static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	con1 &= ~ADC_S3C2410_CON_SELMUX(7);
+	con1 |= ADC_S3C2410_CON_SELMUX(addr);
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_s3c64xx_start_conv,
+};
+
 static void exynos_adc_v2_init_hw(struct exynos_adc *info)
 {
 	u32 con1, con2;
@@ -285,6 +312,9 @@ static const struct exynos_adc_data const exynos3250_adc_data = {
 
 static const struct of_device_id exynos_adc_match[] = {
 	{
+		.compatible = "samsung,s3c6410-adc",
+		.data = &exynos_adc_s3c64xx_data,
+	}, {
 		.compatible = "samsung,exynos-adc-v1",
 		.data = &exynos_adc_v1_data,
 	}, {
-- 
1.8.0