[PATCHv4 5/5] arm64: Add atomic pool for non-coherent and CMA allocations.

[Laura Abbott]

On 7/18/2014 6:43 AM, Catalin Marinas wrote:
> On Wed, Jul 02, 2014 at 07:03:38PM +0100, Laura Abbott wrote:
>> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
>> index 4164c5a..a2487f1 100644
>> --- a/arch/arm64/mm/dma-mapping.c
>> +++ b/arch/arm64/mm/dma-mapping.c
> [...]
>>  static void *__dma_alloc_coherent(struct device *dev, size_t size,
>>  				  dma_addr_t *dma_handle, gfp_t flags,
>>  				  struct dma_attrs *attrs)
>> @@ -53,7 +103,8 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
>>  	if (IS_ENABLED(CONFIG_ZONE_DMA) &&
>>  	    dev->coherent_dma_mask <= DMA_BIT_MASK(32))
>>  		flags |= GFP_DMA;
>> -	if (IS_ENABLED(CONFIG_DMA_CMA)) {
>> +
>> +	if (!(flags & __GFP_WAIT) && IS_ENABLED(CONFIG_DMA_CMA)) {
>>  		struct page *page;
>>  
>>  		size = PAGE_ALIGN(size);
> 
> I think that's the wrong condition here. You want to use CMA if
> (flags & __GFP_WAIT). CMA does not support atomic allocations so it can
> fall back to swiotlb_alloc_coherent().
> 
>> @@ -73,50 +124,56 @@ static void __dma_free_coherent(struct device *dev, size_t size,
>>  				void *vaddr, dma_addr_t dma_handle,
>>  				struct dma_attrs *attrs)
>>  {
>> +	bool freed;
>> +	phys_addr_t paddr = dma_to_phys(dev, dma_handle);
>> +
>>  	if (dev == NULL) {
>>  		WARN_ONCE(1, "Use an actual device structure for DMA allocation\n");
>>  		return;
>>  	}
>>  
>> -	if (IS_ENABLED(CONFIG_DMA_CMA)) {
>> -		phys_addr_t paddr = dma_to_phys(dev, dma_handle);
>>  
>> -		dma_release_from_contiguous(dev,
>> +	freed = dma_release_from_contiguous(dev,
>>  					phys_to_page(paddr),
>>  					size >> PAGE_SHIFT);
>> -	} else {
>> +	if (!freed)
>>  		swiotlb_free_coherent(dev, size, vaddr, dma_handle);
>> -	}
>>  }
> 
> Is __dma_free_coherent() ever called in atomic context? If yes, the
> dma_release_from_contiguous() may not like it since it tries to acquire
> a mutex. But since we don't have the gfp flags here, we don't have an
> easy way to know what to call.
> 
> So the initial idea of always calling __alloc_from_pool() for both
> coherent/non-coherent cases would work better (but still with a single
> shared pool, see below).
> 

We should be okay

__dma_free_coherent -> dma_release_from_contiguous -> cma_release which
bounds checks the CMA region before taking any mutexes unless I missed
something.

The existing behavior on arm is to not allow non-atomic allocations to be
freed atomic context when CMA is enabled so we'd be giving arm64 more
leeway there.  Is being able to free non-atomic allocations in atomic
context really necessary?

>>  static void *__dma_alloc_noncoherent(struct device *dev, size_t size,
>>  				     dma_addr_t *dma_handle, gfp_t flags,
>>  				     struct dma_attrs *attrs)
>>  {
>> -	struct page *page, **map;
>> +	struct page *page;
>>  	void *ptr, *coherent_ptr;
>> -	int order, i;
>>  
>>  	size = PAGE_ALIGN(size);
>> -	order = get_order(size);
>> +
>> +	if (!(flags & __GFP_WAIT)) {
>> +		struct page *page = NULL;
>> +		void *addr = __alloc_from_pool(size, &page);
>> +
>> +		if (addr)
>> +			*dma_handle = phys_to_dma(dev, page_to_phys(page));
>> +
>> +		return addr;
>> +
>> +	}
> 
> If we do the above for the __dma_alloc_coherent() case, we could use the
> same pool but instead of returning addr it could just return
> page_address(page). The downside of sharing the pool is that you need
> cache flushing for every allocation (which we already do for the
> non-atomic case).
> 
>> @@ -332,6 +391,67 @@ static struct notifier_block amba_bus_nb = {
>>  
>>  extern int swiotlb_late_init_with_default_size(size_t default_size);
>>  
>> +static int __init atomic_pool_init(void)
>> +{
>> +	pgprot_t prot = __pgprot(PROT_NORMAL_NC);
>> +	unsigned long nr_pages = atomic_pool_size >> PAGE_SHIFT;
>> +	struct page *page;
>> +	void *addr;
>> +
>> +
>> +	if (dev_get_cma_area(NULL))
> 
> Is it worth using this condition for other places where we check
> IS_ENABLED(CONFIG_DMA_CMA) (maybe as a separate patch).
> 

Yes, it would be good to match arm in that respect.

>> +		page = dma_alloc_from_contiguous(NULL, nr_pages,
>> +					get_order(atomic_pool_size));
>> +	else
>> +		page = alloc_pages(GFP_KERNEL, get_order(atomic_pool_size));
> 
> One problem here is that the atomic pool wouldn't be able to honour
> GFP_DMA (in the latest kernel, CMA is by default in ZONE_DMA). You
> should probably pass GFP_KERNEL|GFP_DMA here. You could also use the
> swiotlb_alloc_coherent() which, with a NULL dev, assumes 32-bit DMA mask
> but it still expects GFP_DMA to be passed.
> 

I think I missed updating this to GFP_DMA. The only advantage I would see
to using swiotlb_alloc_coherent vs. alloc_pages directly would be to
allow the fallback to using a bounce buffer if __get_free_pages failed.
I'll keep this as alloc_pages for now; it can be changed later if there
is a particular need for swiotlb behavior.

>> +	if (page) {
>> +		int ret;
>> +
>> +		atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
>> +		if (!atomic_pool)
>> +			goto free_page;
>> +
>> +		addr = dma_common_contiguous_remap(page, atomic_pool_size,
>> +					VM_USERMAP, prot, atomic_pool_init);
>> +
>> +		if (!addr)
>> +			goto destroy_genpool;
>> +
>> +		memset(addr, 0, atomic_pool_size);
>> +		__dma_flush_range(addr, addr + atomic_pool_size);
> 
> If you add the flushing in the __dma_alloc_noncoherent(), it won't be
> needed here (of course, more efficient here but it would not work if we
> share the pool).
> 
>> +postcore_initcall(atomic_pool_init);
> 
> Why not arch_initcall? Or even better, we could have a common DMA init
> function that calls swiotlb_late_init() and atomic_pool_init() (in this
> order if you decide to use swiotlb allocation above).
> 

Good point. I'll combine the two.

Thanks,
Laura

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation